Installation guide

A-16

Cisco ONS 15530 Hardware Installation Guide

OL-7706-01

Appendix A Specifications

10-Gbps Uplink Card

Table A-24 lists the specifications for the 10-Gbps uplink cards supported by the Cisco ONS 15530 in

the transmit and receive directions.

Note The optical specifications described in this section are only for the individual components and should

not be used to characterize the entire network performance.

SFP Specifications

Table A-25 lists the specifications for the Cisco ONS 15530 fixed rate SFP optics.

Note Only use Cisco-certified SFP optics for the 8-port FC/GE and ESCON aggregation cards.

Table A-24 10-Gbps Uplink Card Specifications

Description Specification

Fiber type SM

1310 nm

1. SM = single mode

Connector SC

Dimensions 10.4 x 1.105 x 8.797 in.

(264.2 x 28.1 x 223.4 mm)

Bit rate 10 GE LAN-PHY

Receiver Minimum Maximum

Receive sensitivity –13.23 dBm

Receive overload 0.5 dBm

Stressed receive sensitivity –10.3 dBm

Transmitter Minimum Maximum

Transmit power –5.2 dBm 0.5 dBm

Wavelength range 1260 nm 1355 nm

Table A-25 Fixed Rate SFP Optics Specifications

Description Specification

Part number 15500-XVRA-01A2

ESCON, OC-3/STM-1 MM

Dimensions (H x W x D) 0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x

5.69 cm)

Data rate 155 Mbps, 200 Mbps

Wavelength 1310 nm

Fiber type MM, 50 µm, 62.5 µm