Installation guide

A-15
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
Appendix A Specifications
10-Gbps ITU Tunable and Non tunable Trunk Card Specifications
10-Gbps ITU Tunable and Non tunable Trunk Card Specifications
Table A-23 lists the specifications for tunable and non tunable 10-Gbps ITU trunk card for the client side
lasers. Optical loss due to splitter modules and connectors should be included in the optical budget
calculation.
Note The optical specifications described in this section are only for the individual components and should
not be used to characterize the entire network performance.
2. OSNR = optical signal-to-noise ratio.
3. Add the proper network-level penalty to the OSNR and/or receive power based on your actual
network topology characteristics, such as dispersion.
4. ps/nm = picoseconds per nanometer.
Table A-23 10-Gbps ITU Tunable and Non tunable Trunk Card Specifications
Description Specification
Fiber type ITU-T G.652
Connector MU
Receiver
Minimum
Maximum
OSNR
1
,
2
1. OSNR = optical signal-to-ratio.
2. Add the proper network level penalty to the OSNR and/or receive power based on your actual
network topology characteristics, such as dispersion.
26 dB
Receive sensitivity
2
–22 dBm
Receive overload –8 dBm
Input wavelength 1430 nm 1580 nm
Transmitter
Minimum
Maximum
Output power 1 dBm 6 dBm
Dispersion tolerance ± 1000 ps/nm
3
3. ps/nm = picosecond per nanometer.