Installation guide

A-13
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
Appendix A Specifications
8-Port Multi-Service Muxponder Specifications
Table A-20 lists the typical latencies for the 8-port multi-service muxponder.
Table A-19 SFPs Supported by the 8-Port Multi-Service Muxponder
Part Number Protocols or Clock Rate Range Supported
15500-XVRA-10A2 Low band 8 Mbps to 200 Mbps
15500-XVRA-10B2 Low band 8 Mbps to 200 Mbps
15500-XVRA-11A2 Mid-band 200 Mbps to 622 Mbps
15500-XVRA-11B2 Mid-band 200 Mbps to 1.25 Gbps
15500-XVRA-12B1 High-band 1.062 Gbps to 2.488 Gbps
15500-XVRA-08D1 T1
1
1.544 Mbps
1. DSX-1 interface
15500-XVRA-09D1 E1 2.044 Mbps
15500-XVRA-10E1 SDI and DVB-ASI video
2, 3
2. In a normal operating environment, the maximum digital video application connection length using a Belden 1694A cable
is 200 m (218 yd). If the chassis ambient operating temperature is above 45°C (113° F) and ports 0 and 1 are used for video
applications with this SFP, the maximum cable connection length supported may be less than the specified 200 m (218 yd),
depending on the operating environment.
3. DVB-ASI = Digital Video Broadcast Asynchronous Serial Interface.
15500-XVRA-11D1 GE 1.25 Gbps, FE 1.25 Mbps
4
4. To ensure proper operation of the 15500-XVRA-11D1 SFP, the ambient operating temperature should not exceed 45°C
(113°F).
ONS-SE-GEFC-SX Fibre Channel (2.125 Gbps), Fibre Channel (1 Gbps), Gigabit Ethernet
Table A-20 Latency Values for the 8-Port Multi-Service Muxponder
Protocol
Unidirectional End-to-End Latency with 0 km Fiber
Typical Maximum
ESCON 10 µs 13 µs
Fibre Channel 4 µs 6 µs
Gigabit Ethernet optical 6 µs 8 µs
Gigabit Ethernet copper 9 µs 11 µs
Fast Ethernet optical 14 µs 17 µs
Fast Ethernet copper 18 µs 20 µs
SDI 17 µs 20 µs
DVB-ASI 9 µs 11 µs