Installation guide

3-12
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
Chapter 3 Connecting the Cisco ONS 15530
Connecting the CPU Switch Module
To connect the Cisco ONS 15530 to a modem, follow these steps:
Step 1 Connect one end of the modem cable to the RJ-45 port on the primary CPU switch module, labeled AUX
(see Figure 3-9).
Figure 3-9 Connecting Modem Cable to Auxiliary Port
Step 2
Run the cable up and through the cable management bracket and connect the other end of the cable to
your modem.
STATUS
RESET
ACTIVE
STANDBY
COMPACT
FLASH
CIRTICAL
MAJOR
AUX
NME
FDX
100MBPS
LINK
CON
CUTOFF
HIST
CLR
CUTOFF
MINOR
15530-CPU
A
L
A
R
M
S
79121