Installation guide

3-2
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
Chapter 3 Connecting the Cisco ONS 15530
Connector Types
Note For power supply cable connecting information, see the “Powering Up the Shelf” section on page 2-31.
Connector Types
Various types of connectors are used to connect the line cards and modules of the Cisco ONS 15530 to
each other and the Internet. Table 3-1 lists the connector types used on each line card and module.
Figure 3-1 through Figure 3-4 show the connector types.
Figure 3-1 RJ-45 Connector
Table 3-1 Line Card and Module Connector Types
Card/Module Connector Type(s)
CPU switch module RJ-45 (Figure 3-1)
OSC module MU (Figure 3-4)
Transponder line card MU (Figure 3-4), SC-Type (Figure 3-2)
OADM module MU (Figure 3-4)
4-Port 1-Gbps/2-Gbps FC aggregation card MU (Figure 3-4)
8-Port FC/GE aggregation card MU (Figure 3-4)
ESCON aggregation card MT-RJ (Figure 3-3)
10-Gbps ITU tunable and non tunable trunk
card
MU (Figure 3-4)
10-Gbps uplink line card SC-Type (Figure 3-2)
WB-VOA module MU (Figure 3-4)
PB-OE module MU (Figure 3-4)
PSM MU (Figure 3-4)
H2396
Access panel
EISA slots