Datasheet

Index
IN-16
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
orderwire
description
2-23
express 2-23
local 2-23
loop 2-24
pin assignments 2-24
OSI
See also LAP-D
See also NSAP
See also point-to-point protocol
connectionless network service (CLNS)
13-32
European network example 13-56 to 13-59
IP-over-CLNS tunnels 13-42 to 13-59
mediation with TCP/IP 13-40
OSI/IP networking scenarios 13-48 to 13-59
protocol list 13-31
provisioning in CTC 13-60
routing 13-35
virtual router constraints 13-42
virtual routers 13-41
OSI/IP See OSI
OSPF
alternative to static routes
13-7
definition 13-10 to 13-12
enabled (figure) 13-11
in open GNE configurations 13-27
not enabled (figure) 13-12
P
partial service state 11-8
path
background block error
15-11, 15-12
errored block 15-11, 15-13
errored second ratio 15-11, 15-12
severely errored second ratio 15-11, 15-13
path overhead, clocking differences 15-4
path signal label 11-18
path trace 11-17
PC. See computer
PCM
2-23
performance monitoring
bit errors corrected parameter
15-5
DS3i-N-12 card 15-17
E1-N-14 and E1-42 cards 15-14
E3-12 card 15-16
FC_MR-4 card 15-40
IPPM 15-3
MRC-12 card 15-39
STM-4 card 15-36
STM4 SH 1310-4 card 15-36
STM-N cards 15-31 to 15-40
thresholds 15-1
ping 13-2
pinout, E100-TX 1-11
POH. See path overhead
pointer justification counts
15-4
point-to-point protocol
description
13-31
HDLC 13-31
in open GNE configurations 13-27
LCP 13-31
popup data 8-11
ports
card list
1-18
drop 11-18
line rate by card 1-18
power monitoring 2-24
power supply 1-16
PPJC-Pdet parameter 15-4
PPJC-Pgen parameter 15-4
PPM description 4-43
protection, for circuits 11-8
protection switching
MS-SPRing span switching
12-6
nonrevertive 7-4
ring switching 12-7
protocols