Datasheet

C-47
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Appendix C Network Element Defaults
C.3 Node Default Settings
• Security Access settings—Set default security settings for LAN access, shell access, serial craft
access, element management system (EMS) access (including Internet Inter-Object Request Broker
Protocol [IIOP] listener port number), TL1 access, and SNMP access.
• Security RADIUS settings—Set default RADIUS server settings for accounting port number,
authentication port number, and whether to enable the node as a final authenticator.
• Security Policy settings—Set the allowable failed logins before lockout, idle user timeout for each
user-level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference between the old and new password, password
aging by security level, enforced single concurrent session per user, and option to disable inactive
user after a set inactivity period.
• BITS Timing settings—Set the AIS threshold, Admin SSM, coding, facility type, framing, state, and
Sa bit (the overhead bit that will carry the SSM) for building integrated timing supply 1 (BITS-1)
and BITS2 timing.
• General Timing settings—Set the mode (External, Line, or Mixed), revertive, and reversion time.
Note Any node level defaults changed using the Provisioning > Defaults tab, changes existing node level
provisioning. Although this is service affecting, it depends on the type of defaults changed, for example,
general, and all timing and security attributes. The “Changing default values for some node level
attributes overrides the current provisioning.” message is displayed. The Side Effects column of the
Defaults editor (right-click a column header and select Show Column > Side Effects) explains the effect
of changing the default values. However, when the card level defaults are changed using the
Provisioning > Defaults tab, existing card provisioning remains unaffected.
Note For more information about each individual node setting, refer to the “Change Node Settings” chapter
of the Cisco ONS 15454 SDH Procedure Guide.
Table C-16 Node Default Settings
Default Name Default Value Default Domain
NODE.circuits.sncp.HO_SDBER 1.00E-06 1E-5, 1E-6, 1E-7,
1E-8, 1E-9
NODE.circuits.sncp.HO_SFBER 1.00E-04 1E-3, 1E-4, 1E-5
NODE.circuits.sncp.LO_SDBER 1.00E-06 1E-5, 1E-6, 1E-7,
1E-8
NODE.circuits.sncp.LO_SFBER 1.00E-04 1E-3, 1E-4, 1E-5
NODE.circuits.sncp.ReversionTime 5.0 (minutes) 0.5, 1.0, 1.5 .. 12.0
NODE.circuits.sncp.Revertive FALSE TRUE, FALSE
NODE.circuits.State unlocked,
automaticInS
ervice
unlocked, locked,
disabled, locked,
maintenance,
unlocked,
automaticInService
NODE.general.DefaultsDescription Factory
Defaults
Free form field