Datasheet

A-44
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Appendix A Hardware Specifications
A.7 Ethernet Card Specifications
– Minimum transmitter output power: Depends on SFP (see the “A.2 SFP and XFP
Specifications” section on page A-3)
• Receiver
– Maximum receiver level: Depends on SFP (see the “A.2 SFP and XFP Specifications” section
on page A-3)
– Minimum receiver level: Depends on SFP (see the “A.2 SFP and XFP Specifications” section
on page A-3)
– Receiver input wavelength range: 1260 to 1565 nm
• Environmental
– Operating temperature: 0 to +55 degrees Celsius (32 to +131 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 40.00 W, 0.83 A at –48 V, 136.49 BTU/hr
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.716 in. (18.2 mm)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 9.250 in. (235 mm)
– Weight (not including clam shell): 3.1 lb (1.3 kg)
A.7 Ethernet Card Specifications
This section includes specifications for the Ethernet cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.
A.7.1 E100T-G Card Specifications
The E100T-G card has the following specifications:
• Environmental
– Operating temperature:
C-Temp (15454-E100T-G): 0 to +55 degrees Celsius (32 to 131 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 65 W, 1.35 A, 221.93 BTU/hr
• Dimensions
– Height: 321.3 mm (12.650 in.)
– Width: 18.2 mm (0.716 in.)
– Depth: 228.6 mm (9.000 in.)
– Weight (not including clam shell): 2.3 lb (1.0 kg)
• Compliance