Datasheet

A-28
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Appendix A Hardware Specifications
A.6 Optical Card Specifications
– Connectors: 8-pin RJ-45
• Environmental
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 0.38 W (provided by +5 V from the TCC2/TCC2P card), 1.37 BTU/hr
• Dimensions
– Height: 182 mm (7.165 in.)
– Width: 32 mm (1.25 in.)
– Depth: 92 mm (3.62 in.)
– Depth with backplane connector: 98 mm (3.87 in.)
– Weight (not including clam shell): 0.2 kg (0.5 lb)
A.6 Optical Card Specifications
This section provides specifications for the optical cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.
A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
The OC3 IR 4/STM1 SH 1310 card has the following specifications:
• Line
– Bit rate: 155.52 Mbps
– Code: Scrambled non-return to zero (NRZ)
– Fiber: 1310-nm single-mode
– Loopback modes: Terminal and facility
– Connector: SC
– Compliance: ITU-T G.707, ITU-T G.957
• Transmitter
– Maximum transmitter output power: –8 dBm
– Minimum transmitter output power: –15 dBm
– Center wavelength: 1261 to 1360 nm
– Nominal wavelength: 1310 nm
– Transmitter: Fabry Perot laser
– Extinction ratio: 8.2 dB
– Dispersion ratio: 96 ps/nm
• Receiver
– Maximum receiver level: –8 dBm at BER 1 * 10 exp – 12