Datasheet

A-19
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Appendix A Hardware Specifications
A.5.6 FILLER Card
– Depth with backplane connector: 235 mm (9.250 in.)
– Weight (not including clam shell): 0.7 kg (1.7 lb)
A.5.6 FILLER Card
The FILLER card has the following specifications:
• Environmental
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: Not applicable
• Dimensions
– Height: 321.3 mm (12.650 in.)
– Width: 18.2 mm (0.716 in.)
– Weight (not including clam shell): 0.2 kg (0.4 lb)
A.5.7 FMEC-E1 Specifications
The FMEC-E1 has the following specifications:
• FMEC-E1 input
– Bit rate: 2.048 Mbps +/–50 ppm
– Line code: HDB-3
– Termination: Unbalanced coaxial cable
– Input impedance: 75 ohms +/–5 percent
– Cable loss: Up to 6 dB at 1024 kHz
• FMEC-E1 output
– Bit rate: 2.048 Mbps +/–50 ppm
– Line code: HDB-3
– Termination: Unbalanced coaxial cable
– Output impedance: 75 ohms +/–5 percent
– Pulse shape: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and
Table 7
– Pulse amplitude: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and
Table 7
• FMEC-E1 electrical interface
– Connectors: 1.0/2.3 miniature coax connectors
• Environmental
– Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 0.00 W, 0.00 A at –48 V, 0.0 BTU/hr