Datasheet

xxxviii
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
About this Manual
Related Documentation
Use the Cisco ONS 15454 SDH Reference Manual with the following referenced publications:
• Cisco ONS 15454 SDH Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and
network.
• Cisco ONS 15454 SDH Troubleshooting Guide
Provides general troubleshooting procedures, alarm descriptions and troubleshooting procedures,
error messages, and transient conditions.
• Cisco ONS 15454 SDH TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions
and modifiers for the Cisco ONS 15454 SDH.
• Cisco ONS 15454 SDH TL1 Reference Guide
Provides general information, procedures, and errors for TL1 in the Cisco ONS 15454 SDH.
• Ethernet Card Software Feature and Configuration G uide for the Cisco ONS 15454, Cisco ONS
15454 SDH, and Cisco ONS 15327
Provides software features for all Ethernet cards and configuration information for Cisco IOS on
ML-Series cards.
• Release Notes for the Cisco ONS 15454 SDH Release 7.0
Provides caveats, closed issues, and new feature and functionality information.
For an update on End-of-Life and End-of-Sale notices, refer to
http://cisco.com/en/US/products/hw/optical/ps2006/prod_eol_notices_list.html.
Chapter 13, “Management Network
Connectivity”
Provides an overview of ONS 15454 SDH data
communications network (DCN) connectivity,
scenarios showing Cisco ONS 15454 SDH nodes
in common IP network configurations, and
information about provisionable patchcords, the IP
routing table, external firewalls, and open gateway
network element (GNE) networks.
Chapter 14, “Alarm Monitoring and
Management”
Explains alarm, condition, and history display;
severities; profiles; suppression; external alarms;
and the audit trail.
Chapter 15, “Performance Monitoring” Provides performance-monitoring parameters for
all ONS 15454 SDH cards.
Chapter 16, “SNMP” Describes simple network management protocol
(SNMP) as it applies to the ONS 15454 SDH.
Appendix A, “Hardware Specifications” Provides specifications for the ONS 15454 SDH
shelf assembly and cards.
Appendix B, “Administrative and Service States” Describes the extended state model for cards,
ports, and cross-connects.
Appendix C, “Network Element Defaults” Lists card, node, and CTC-level network element
(NE) defaults.
Table 1 Cisco ONS 15454 SDH Reference Manual Chapters (continued)
Title Summary