Datasheet

6-4
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Chapter 6 Storage Access Networking Cards
6.2.2 Enhanced Card Mode
• 1-Gbps Fibre Channel/FICON is mapped into:
– STS24c, STS48c
– VC4-8c, VC4-16c
– STS1-Xv where X is 19 to 24
– STS3c-Xv where X is 6 to 8
– VC4-Xv where X is 6 to 8
• 2-Gbps Fibre Channel/FICON is mapped into:
– STS48c
– VC4-16c
– STS1-Xv where X is 37 to 48
– STS3c-Xv where X is 12 to 16
– VC4-Xv where X is 12 to 16
6.2.2 Enhanced Card Mode
Features available in enhanced card mode are given in this section.
6.2.2.1 Mapping
1-Gbps Fibre Channel/FICON is mapped into:
– STS-1, STS-3c, STS-6c, STS-9c, STS-12c, STS-18c, STS-24c, STS-48c
– VC4-1c, VC4-2c, VC4-3c, VC4-4c, VC4-6c, VC4-8c, VC4-16c
– STS-1-Xv where X is 1 to 24
– STS-3c-Xv where X is 1 to 8
– VC4-Xv where X is 1 to 8
2-Gbps Fibre Channel/FICON is mapped into:
– STS-1, STS-3c, STS-6c, STS-9c, STS-12c, STS-18c, STS-24c, STS-36c, STS-48c
– VC4-1c, VC4-2c, VC4-3c, VC4-4c, VC4-6c, VC4-8c, VC4-12c, VC4-16c
– STS-1-Xv where X is 1 to 48
– STS-3c-Xv where X is 1 to 16
– VC4-Xv where X is 1 to 16
6.2.2.2 SW-LCAS
VCAT group (VCG) is reconfigurable when the software link capacity adjustment scheme (SW-LCAS)
is enabled, as follows:
• Out-of-service (OOS) and out-of-group (OOG) members can be removed from the VCG.
• Members with deleted cross-connects can be removed from VCGs.
• Errored members can be autonomously removed from VCGs.
• Degraded bandwidth VCGs are supported.