Datasheet

4-41
Cisco ONS 15454 SDH Reference Manual, R7.0
October 2008
Chapter 4 Optical Cards
4.17.2 SFP Description
Caution Only use SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP and XFP
pluggable module’s top assembly numbers (TANs) are provided in Table 4-20.
4.17.2 SFP Description
SFPs are integrated fiber optic transceivers that provide high speed serial links from a port or slot to the
network. Various latching mechanisms are used on the modules. There is no correlation between the type
of latch to the model type (such as SX or LX/LH) and the technology type (such as Gigabit Ethernet).
See the label on the SFP for technology type and model. One type of latch available is a mylar tab
(Figure 4-18), a second type of latch available is an actuator/button (Figure 4-19), and a third type of
latch is a bail clasp (Figure 4-20).
SFP dimensions are:
• Height 0.03 in. (8.5 mm)
• Width 0.53 in. (13.4 mm)
• Depth 2.22 in. (56.5 mm)
SFP and XFP temperature ranges for are:
• COM—commercial operating temperature range -5•C to 70•CC to 70•C
• EXT—extended operating temperature range -5•C to 85•CC to 85•C
Table 4-20 SFP and XFP Card Compatibility
Card
Compatible SFPs and XFPs
(Cisco Product ID)
Cisco Top Assembly Number
(TAN)
15454_MRC-12
(ONS 15454 SONET/SDH)
ONS-SI-2G-S1
ONS-SI-2G-I1
ONS-SI-2G-L1
ONS-SI-2G-L2
ONS-SC-2G-30.3 through
ONS-SC-2G-60.6
ONS-SI-622-I1
ONS-SI-622-L1
ONS-SI-622-L2
ONS-SE-622-1470 through
ONS-SE-622-1610
ONS-SI-155-I1
ONS-SI-155-L1
ONS-SI-155-L2
ONS_SE-155-1470 through
ONS-SE-155-1610
10-1992-01
10-1993-01
10-2102-01
10-1990-01
10-2155-01 through
10-2186-01
10-1956-01
10-1958-01
10-1936-01
10-2004-01 through
10-2011-01
10-1938-01
10-1957-01
10-1937-01
10-1996-01 through
10-2003-01
OC192SR1/STM64IO Short Reach
(ONS 15454 SONET/SDH)
1
1. CTC refers to this card as STM64-XFP
ONS-XC-10G-S1 10-2012-01
OC192/STM64 Any Reach
(ONS 15454 SONET/SDH)
1
ONS-XC-10G-S1
ONS-XC-10G-I2
ONS-XC-10G-L2
10-2012-01
10-2193-01
10-2194-01