Datasheet

ManualsBrandsCisco Manualschassis components15454E-19IEC-KIT=

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Installing IEC Rack Mounting Brackets on the

ONS 15454 SDH Shelf Assembly

Product Name: 15454E-19IEC-KIT=

This document provides installation procedures for installing mounting brackets on the ONS 15454 SDH

shelf, to allow the shelf assembly to be installed in a 19- inch IEC rack (IEC-297-1). Use this document

in conjunction with the Cisco ONS 15454 SDH Procedure Guide.

This document contains the following sections:

• “IEC Rack Kit” section on page -1

• “Install the Mounting Brackets” section on page -1

• “Related Documentation” section on page -4

• “Obtaining Documentation” section on page -4

• “Obtaining Technical Assistance” section on page -6

This document contains the following procedures:

“Install the Mounting Brackets” procedure on page -1

IEC Rack Kit

The IEC rack mounting kit for the ONS 15454 SDH shelf includes the following items.

• IEC-297 Compatible 19 in. brackets (2)

• Pan Head M4.0 x 8mm mounting screws (12)

Install the Mounting Brackets

To perform this procedure you will need the IEC rack mounting kit and a Phillips screwdriver.

Step 1 Verify that your shelf assembly is equipped with the low profile IEC rack compatible fiber guides.

Step 2 If necessary, replace the fiber guides with new guides from kit 15454E-19FGD-KIT=.

Summary of content (8 pages)

PAGE 1
Installing IEC Rack Mounting Brackets on the ONS 15454 SDH Shelf Assembly Product Name: 15454E-19IEC-KIT= This document provides installation procedures for installing mounting brackets on the ONS 15454 SDH shelf, to allow the shelf assembly to be installed in a 19- inch IEC rack (IEC-297-1). Use this document in conjunction with the Cisco ONS 15454 SDH Procedure Guide.
PAGE 2
Install the Mounting Brackets Step 3 Align the mounting bracket screw holes against the shelf assembly screw holes according to Figure 1, depending on whether you want to mount the shelf at the front or the center of the equipment rack. When aligned properly the mounting flange will be 38 mm from the front edge of the shelf assembly when front mounted (Figure 2) and 114.5 mm when center mounted (Figure 3). Step 4 Use a Phillips screwdriver to install the six screws and tighten.
PAGE 3
Install the Mounting Brackets Figure 2 Positioning the Mounting Brackets for Front Mounting Top View 535 mm total width 280mm 38 mm Side View, Right Bracket Front 173.
PAGE 4
Related Documentation Figure 3 Positioning the Mounting Brackets for Center Mounting Top View 535 mm total width 280mm 114.5 mm Side View, Right Bracket Front 173.4 mm 115090 348mm Refer to the Cisco ONS 15454 SDH Procedure Guide for procedures to install the shelf assembly in a rack.
PAGE 5
World Wide Web World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following URL: http://www.cisco.com Translated documentation is available at the following URL: http://www.cisco.com/public/countries_languages.shtml Documentation CD-ROM Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which is shipped with your product.
PAGE 6
Obtaining Technical Assistance Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site. Cisco.com Cisco.
PAGE 7
Technical Assistance Center Cisco TAC Web Site The Cisco TAC Web Site allows you to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to the following URL: http://www.cisco.com/tac All customers, partners, and resellers who have a valid Cisco services contract have complete access to the technical support resources on the Cisco TAC Web Site.
PAGE 8
Technical Assistance Center Installing IEC Rack Mounting Brackets on the ONS 15454 SDH Shelf Assembly 8 78-15831-02