Specifications

1-45
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Chapter 1 Alarm Troubleshooting
c. Click Delete.
Step 5 If the card is paired in a protection scheme, delete the protection group:
a. Click the Provisioning > Protection tabs.
b. Click the protection group of the reporting card.
c. Click Delete.
Step 6 If the card is provisioned for DCC, delete the DCC provisioning:
a. Click the SONET DCC > Provisioning tabs.
b. Click the slots and ports listed in SDCC Terminations.
c. Click Delete and click Yes in the dialog box that appears.
Step 7 If the card is used as a timing reference, change the timing reference:
a. Click the Provisioning > Timing tabs.
b. Click the Ref-1 menu.
c. Change Ref-1 from the listed OC-N card to Internal Clock.
d. Click Apply.
Step 8 Right-click the card reporting the IMPROPRMVL and choose Delete.
1.3.64 INCOMPATIBLE-SW
• Minor, Non-service affecting
The CTC software version loaded on the connecting workstation and the CTC software version loaded
on the TCC+ card are incompatible. This occurs when the TCC+ software is upgraded but the PC has
not yet upgraded the compatible CTC jar file. INCOMPATIBLE-SW also occurs when CTC logs into a
node with compatible software but encounters another node in the network that has a newer version of
CTC.
Procedure: Clear the INCOMPATIBLE-SW Alarm
Step 1 Exit the current CTC session and completely close the browser.
Step 2 Start the browser.
Step 3 Type the ONS 15454 IP address of the node that reported the alarm. This can be the original IP address
you logged on with or an IP address other than the original.
Step 4 Log into CTC. The browser will download the jar file from CTC.
1.3.65 INVMACADR
• Major, Non-service affecting