Specifications

Procedures
xxvii
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Back up the Database 3-10
Restore the Database 3-11
Revert to an Earlier Software Load 3-13
Switch Traffic and Replace an In-Service Cross-Connect Card 3-14
Upgrade the TCC Card to the TCC+ Card 3-16
Upgrade the XC Card to the XCVT Card 3-17
Upgrade the XC/XCVT Card to the XC10G Card 3-19
Upgrade the DS3 Card to the DS3E Card (or the DS3N Card to the DS3EN Card) 3-20
Downgrade a DS3 or DS3N Card 3-21
Perform a Span Upgrade Using the Span Upgrade Wizard 3-23
Perform a Manual Span Upgrade on a Two-Fiber BLSR 3-25
Perform a Manual Span Upgrade on a Four-Fiber BLSR 3-26
Perform a Manual Span Upgrade on a UPSR 3-27
Perform a Manual Span Upgrade on a 1+1 Protection Group 3-28
Apply a Lock On 3-29
Apply a Lock Out 3-30
Clear a Lock On or Lock Out 3-30
Remove the Backplane Cover or EIA 3-32
Install the EIAs 3-32
Power Down a Node 3-34
Card Reference