Specifications

4-30
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Chapter 4 Card Reference
XC10G Cross-Connect Card
Note A configuration mismatch alarm occurs when a XC or XCVT cross-connect card coexists with an
OC-192 card placed in the high-speed slot, or with an OC-48 card placed in the multispeed slot.
The TCC+ card, Software R3.1 or higher and the new 15454-SA-ANSI shelf assembly are required for
the operation of the XC10G. If you are using Ethernet cards, the E1000-2-G or the E100T-G must be
used when the XC10G cross-connect card is in use. Do not pair an XC or XCVT with an XC10G. When
upgrading from XC or XCVT to the XC10G card, see the Cisco ONS 15454 Installation and Operations
Guide for more information.
4.9.5 XC10G Card Specifications
• Environmental
– Operating Temperature:
C-Temp (15454-XC-10G): 0 to +55 degrees Celsius
– Operating Humidity: 5 - 85%, non-condensing
– Power Consumption: 54 W, 1.12 amps, 184.38 BTU/Hr.
• Dimensions
– Height: 12.650 in.
– Width: 0.716 in.
– Depth: 9.000 in.
– Card Weight: 1.5 lbs, 0.6 kg
• Compliance
– ONS 15454 cards, when installed in a system, comply with these standards: Safety: UL 1950,
CSA C22.2 No. 950, EN 60950, IEC 60950