Specifications

4-10
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Chapter 4 Card Reference
Card Overview
DS3XM-6 (Transmux)
Yes Yes Yes Yes Yes Yes Yes
Note Use Software R3.0 or higher to enable all enhanced performance monitoring functions on the
DS-3E cards. With Software R2.2.2, the DS-3E cards operate as the older DS-3 cards without
enhanced performance monitoring.
Table 4-12 Optical Card Software and Cross-Connect Card Compatibility for the ONS 15454
Optical Cards
Software
R2.2.1
Software
R2.2.2
Software
R3.0.1
Software
R3.1
XC
Card
XCVT
Card
XC10G
Card
OC3 IR 4 1310
Yes Yes Yes Yes, See
Note
Yes Yes Yes
OC12 IR 1310
Yes Yes Yes Yes, See
Note
Yes Yes Yes
OC12 LR 1310
Yes Yes Yes Yes, See
Note
Yes Yes Yes
OC12 LR 1550
Yes Yes Yes Yes, See
Note
Yes Yes Yes
Note The OC-3 and OC-12 cards listed above are functionally the same as the equivalent card listed
below with the STM-N name.
OC3 IR 4/STM1 SH 1310
Yes Yes Yes Yes Yes Yes Yes
OC12 IR/STM4 SH 1310
Yes Yes Yes Yes Yes Yes Yes
OC12 LR/STM4 LH 1310
Yes Yes Yes Yes Yes Yes Yes
OC12 LR/STM4 LH 1550
Yes Yes Yes Yes Yes Yes Yes
OC48 IR 1310
Yes Yes Yes Yes Yes Yes Yes
OC48 LR 1550
Yes Yes Yes Yes Yes Yes Yes
OC48 IR/STM16 SH AS 1310
———Yes, See
Note
——Yes, See
Note
OC48 LR/STM16 LH AS 1550
———Yes, See
Note
——Yes, See
Note
Note Use the XC10G card, the TCC+ card, Software R3.1 or higher and the new 15454-SA-ANSI
shelf assembly to enable the OC48 IR/STM16 SH AS 1310, OC48 LR/STM16 LH AS 1550,
and the OC192 LR/STM64 LH 1550 cards.
OC48 ELR/STM16 EH 100 GHz
Yes Yes Yes Yes Yes Yes Yes
OC48 ELR 200 GHz
Yes Yes Yes Yes Yes Yes Yes
OC192 LR/STM64 LH 1550
———Yes, See
Note
——Yes, See
Note
Table 4-11 Electrical Card Software and Cross-Connect Card Compatibility for the ONS 15454
Electrical Cards
Software
R2.2.1
Software
R2.2.2
Software
R3.0.1
Software
R3.1
XC
Card
XCVT
Card
XC10G
Card