Specifications

4-5
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Chapter 4 Card Reference
Card Overview
4.1.5 Card and Fan-Tray Assembly Power Requirements
Table 4-5 lists power requirements for individual cards and Table 4-6 on page 4-6 shows fan-tray
assembly power requirements.
Note Asterisks (*) next to card or fan tray names mean the power specification shown below is based on
a calculation because an actual measurement was not available at the time of publication.
Table 4-5 Individual Card Power Requirements
Card Type Card Name Watts Amps BTU/Hr.
Control Cards
TCC+ 9.82 0.20 33.53
XC * 13 0.28 46
XCVT 34.40 0.72 117.46
XC10G * 54 1.12 184.38
AIC 6.01 0.12 20.52
Electrical
Cards
EC1-12 36.60 0.76 124.97
DS1-14 12.60 0.26 43.02
DS1N-14 12.60 0.26 43.02
DS3-12 38.20 0.79 130.43
DS3N-12 38.20 0.79 130.43
DS3-12E 26.80 0.56 91.51
DS3N-12E 26.80 0.56 91.51
DS3XM-6 Transmux * 20 0.42 68
Optical Cards
OC3 IR 4 SH 1310 19.20 0.40 65.56
OC12 IR 1310 10.90 0.23 37.22
OC12 LR 1310 10.90 0.23 37.22
OC12 LR 1550 9.28 0.19 31.68
OC3 IR 4/ STM1 SH 1310 19.20 0.40 65.56
OC12 IR/ STM4 SH 1310 10.90 0.23 37.22
OC12 LR/ STM4 LH 1310 * 12 0.25 41
OC12 LR/ STM4 LH 1550 9.28 0.19 31.68
OC48 IR 1310 32.20 0.67 109.94
OC48 LR 1550 26.80 0.56 91.50
OC48 IR/ STM16 SH AS 1310 37.20 0.77 127.01
OC48 LR/ STM16 LH AS 1550 37.20 0.77 127.01
OC48 ELR/ STM16 EH 100 GHz 31.20 0.65 106.53
OC48 ELR 200 GHz 31.20 0.65 106.53
OC192 LR/ STM64 LH 1550 72.20 1.50 246.52