Specifications

2-33
Cisco ONS 15454 Troubleshooting and Maintenance Guide
November 2001
Chapter 2 General Troubleshooting
Figure 2-16 Installing a GBIC on the E1000-2/E1000-2-G card
Step 7 Slide the GBIC through the front flap until you hear a click.
The click indicates that the GBIC is locked into the slot.
Step 8 When you are ready to attach the network interface fiber-optic cable, remove the protective plug from
the GBIC and save the plug for future use.
2.5.3 Create CAT-5 Cables
You can manufacture your own CAT-5 cables for use with the ONS 15454. Use a cross-over cable when
connecting an ONS 15454 to a router, hub, LAN modem, or switch, and use a straight-through cable
when connecting an ONS 15454 to a workstation. Use CAT 5 cable RJ-45 T-568B, Color Code
(100 Mbps).
E1000
2
FAIL
ACT
1
SF
33678 12931
2
RX
TX
RX
TX
ACT/LINK
ACT/LINK
44734
Plug