Brochure Cisco ONS Family Optical Pluggable Modules This document provides Technical Descriptions, Applications, and compatibility information for the Gigabit Interface Converter (GBIC), Small Form-Factor Pluggable (SFP), and 10 Gigabit Small Form-Factor Pluggable (XFP) optics modules in the Cisco ONS product family. Summary ® Cisco offers a comprehensive range of pluggable optical modules for the Cisco ONS Family of multiservice platforms.
Brochure Technical Overview SFP Module The SFP transceiver module (Figure 1) is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA). Figure 1.
Brochure Figure 2. SFP Module Block Diagram GBIC Module The GBIC transceiver module (Figure 3) is a bidirectional device with a transmitter and receiver in the same physical package. This transceiver converts serial electric signals to serial optical signals and vice versa. In networking, a GBIC is used to interface a fiber optic system with an Ethernet system, such as Fibre Channel and Gigabit Ethernet. Figure 3. GBIC Transceiver Modules for the Cisco ONS Family © 2008 Cisco Systems, Inc.
Brochure Figure 4. Functional Diagram of Typical Shortwave Laser GBIC XFP Module The XFP transceiver module (Figure 5) is a bidirectional device with a transmitter and receiver in the same physical package. The XFP module contains a 30-pin surface mount connector on the electrical interface and a duplex LC connector on the optical interface. Figure 5. XFP Transceiver Module for the Cisco ONS Family Figure 6 shows an XFP transceiver module functional block diagram.
Brochure Transmitter In the transmit direction, the transceiver module receives a 10-Gbps electrical data signal and transmits the data as an optical signal via an E/O converter. The optical output power is held constant by an automatic power control circuit. The transmitter also contains a Clock Data Recovery (CDR) circuit. The function of this circuit is to attenuate and reshape any jitter received on the electrical interface.
Brochure There are still some older product IDs for the Cisco ONS 15454 platform, but those IDs will migrate toward the newer ID scheme for the Cisco ONS Family. Red Color codes indicate deltas introduced with the 9.0 release. SONET/SDH SFP Modules Cisco offers a wide range of different SFP modules that are fully complaint with SONET and SDH standards. Table 1 provides details. Table 1.
Brochure Data SFP Modules Cisco offers a wide range of different data SFP modules able to transmit Gigabit Ethernet, Fibre channel, FICON, and ESCON signal format. Table 2 provides details. Table 2. Data SFP Modules Temperature Range (°C) Product ID Product Description Part Number Applicable Standard ONS-SE-100-LX10= SFP – 100 Mbps Long Reach – 1310 nm – SM – LC, EXT-TEMP 10-2213-01 100Base LX IEEE-802.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) ONS-SE-200-MM= SFP-ESCON – 1310 nm – MM – LC – EXT TEMP 10-2248-01 ESCON –10 to +85 ONS-SE-4G-MM= 4G FC SFP, 850 nm, LC, MM – EXT TEMP 10-2259-01 400-M5-SN-I and 400-M6-SN-I –10 to +85 ONS-SE-4G-SM= 4G FC SFP, 1310 nm, LC, SM – EXT TEMP 10-2252-01 400-SM-LC-L –10 to +85 1: This SFP module will replace the old 15327-SFP-LC-SX= and 15454-SFP-LC-SX= that have begun the end-of-life process.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) ONS-SC-2G-35.0= OC-48/STM-16, SFP, 1535.04, 100 GHz, LC 10-2160-02 ITU G694, GR2918 0 to +70 ONS-SC-2G-35.8= OC-48/STM-16, SFP, 1535.82, 100 GHz, LC 10-2161-02 ITU G694, GR2918 0 to +70 ONS-SC-2G-36.6= OC-48/STM-16, SFP, 1536.61, 100 GHz, LC 10-2162-02 ITU G694, GR2918 0 to +70 ONS-SC-2G-38.1= OC-48/STM-16, SFP, 1538.19, 100 GHz, LC 10-2163-02 ITU G694, GR2918 0 to +70 ONS-SC-2G-38.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) ONS-SC-2G-59.7= OC-48/STM-16, SFP, 1559.79, 100 GHz, LC 10-2183-02 ITU G694, GR2918 0 to +70 ONS-SC-2G-60.6= OC-48/STM-16, SFP, 1560.61, 100 GHz, LC 10-2184-02 ITU G694, GR2918 0 to +70 CWDM SFP Modules Cisco offers a wide range of CWDM ITU-T compliant SFP modules. Table 6 lists the details. Table 6.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) ONS-SC-Z3-1590= SFP – OC-48/STM-16/GE, CWDM, 1590 nm 10-2291-01 ITU-T G.694.2 0 to +70 ONS-SC-Z3-1610= SFP – OC-48/STM-16/GE, CWDM, 1610 nm 10-2292-01 ITU-T G.694.2 0 to +70 ONS-SE-2G-1470= SFP – OC-48/STM-16/GE, CWDM, 1470 nm Ext Temp 10-2461-01 ITU-T G.694.2 0 to +70 ONS-SE-2G-1490= SFP – OC-48/STM-16/GE, CWDM, 1490 nm Ext Temp 10-2462-01 ITU-T G.694.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) 15454-GBIC-1530= 1000BASE-CWDM 1530 nm GBIC (single mode only) 10-1456-01 ITU-T G.694.2 0 to +70 15454-GBIC-1550= 1000BASE-CWDM 1550 nm GBIC (single mode only) 10-1457-01 ITU-T G.694.2 0 to +70 15454-GBIC-1570= 1000BASE-CWDM 1570 nm GBIC (single mode only) 10-1458-01 ITU-T G.694.2 0 to +70 15454-GBIC-1590= 1000BASE-CWDM 1590 nm GBIC (single mode only) 10-1459-01 ITU-T G.694.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) 15454-GBIC-59.7= 1000BASE-DWDM 1559.79 nm GBIC 10-1875-01 ITU G694, GR2918 0 to +70 15454-GBIC-60.6= 1000BASE-DWDM 1560.61 nm GBIC 10-1876-01 ITU G694, GR2918 0 to +70 XFP List and Description Grey XFP Modules Cisco offers a wide range of Grey XFP modules. Table 10 lists the details. Table 10.
Brochure Product ID Product Description Part Number Applicable Standard Temperature Range (°C) ONS-XC-10G-40.5= OC-192/STM-64/10GE, XFP, 1534.25, 100 GHz, LC 10-2342-02 ITU G694, GR2918 0 to +70 ONS-XC-10G-41.3= OC-192/STM-64/10GE, XFP, 1535.04, 100 GHz, LC 10-2341-02 ITU G694, GR2918 0 to +70 ONS-XC-10G-42.1= OC-192/STM-64/10GE, XFP, 1535.82, 100 GHz, LC 10-2340-02 ITU G694, GR2918 0 to +70 ONS-XC-10G-42.9= OC-192/STM-64/10GE, XFP, 1536.
Brochure SONET/SDH SFP Modules The Cisco SFP modules are compatible with SONET/SDH standards, and support the digital diagnostic functions specified in the SFF-8742 MSA. Tables 12 lists the optical parameters for the Cisco ONS SONET/SDH SFP modules. Table 12. SONET/SDH SFP Modules: Optical Specifications Product ID Operating Wavelength Range (nm) Transmit Power Range (dBm) Receiver Power Range (dBm) Maximum Dispersion (ps/nm) 15454-SFP3-1-IR= 1261–1360 –15 to –8 –28 to –8 96 (at 155.
Brochure Operating Wavelength Range (nm) Transmit Power Range (dBm) Receiver Power Range (dBm) 15327-SFP-LC-LX= 15454-SFP-LC-LX/LH= 15454-SFP-GE+-LX= ONS-SC-GE-LX= ONS-SI-GE-LX= ONS-SE-G2F-LX= ONS-GC-GE-LX= 1270–1355 –9.5 to –3 –19 to –3 NA ONS-GC-GE-ZX= ONS-SI-GE-ZX= ONS-SE-GE-ZX= 1500–1580 0 to +5 –23 to –3 1200–1600 Product ID 6 Maximum Dispersion (ps/nm) 7 4: 62.5/125 µm, NA = 0.275 fiber -12 5: Minimum Stressed Sensitivity (10 ): -12.5(62.5um) and -13.
Brochure Multirate SFP Modules Table 16 shows the optical parameters of the multirate SFP module for the Cisco ONS 15600 Series platform. Table 16. Multirate SFP Module: Optical Parameters Product ID ONS-SE-Z1= Operating Wavelength Range (nm) Optical Transmit Power (dBm) 1270–1360 (Tx) 1270–1600 (Rx) –5 to 0 Receive Sensitivity (dBm) –18 (OC-48/STM-16) –22 (GE) –23 (OC-12/STM-4) –23 (OC-3/STM-1) CWDM and DWDM GBICs The Cisco ONS 15454 GBICs support both CWDM and DWDM.
Brochure Table 21. DWDM SFP Modules: Optical Performance Optical Performance Power-Limited Performances Input power range dBm –9 to –28 At BER=10e-12 with SONET framed PRBS23 at OSNR of 21dB, 0.1nm BW Dispersion tolerance ps/nm –800 to +2400 Power Penalty=3dB, OSNR=21dB at 0.1nmBW (Noise Penalty=0dB) Input power range dBm –9 to –22 At BER=10e-12 with SONET framed PRBS23 at OSNR of 16dB at 0.1nm bandwidth Dispersion tolerance ps/nm –800 to +2400 Noise Penalty=3dB, OSNR=19dB at 0.
Brochure Optical Performance Long Wavelength Performances C Band NO-FEC Applications Noise-Limited Input power range dBm –7 to –18 At BER=10e-12 applicable at 9.9G, 10.3G only 17dB OSNR (0.5nm RBW) Input power range dBm –7 to –18 At BER=10e-12 (–500 to +1600 ps/nm) applicable at 9.9G, 10.3G only – 20dB OSNR (0.5nm RBW) Long Wavelength Performances C Band FEC Applications Noise-Limited Input power range dBm –7 to –18 At BER PREFEC <10e-5 applicable at 10.7G, 11.1G only -- 11dB OSNR (0.
Brochure CE-MR-10 ONS-SE-100-BX10D= 9.0 8.5 8.5 ONS-SE-100-BX10U= 9.0 8.5 8.5 8.5 8.5 CE1000-4 MRC-4 8.5 MRC-12 8.5 10G-XR 9.0 10G-SR1 ONS-SI-100-FX= ML1000-2 6.0 G1K-4 ONS-SE-100-FX= Product ID FC_MR-4 ML-MR-10 MRC-12-2.5G ML100-X-8 E1000-2-G Cisco ONS 15454 MSPP Boards 15454-SFP-LC-SX= 4.x 15454-SFP-LC-LX/LH= 4.x ONS-SC-GE-SX= 4.x ONS-SI-GE-SX= 9.0 ONS-SC-GE-LX= 4.x ONS-SI-GE-LX= 9.0 8.5 8.5 ONS-SI-GE-ZX= 9.0 8.5 8.5 8.5 8.5 8.5 8.
Brochure 22: A maximum of 4 DWDM or CWDM SFP can be placed in the ML-MR and CE-MR cards. No other SFPs can be placed in the board. The maximum ambient temperature suitable for this configuration is +45°C. Table 27. Cisco ONS 15454 MSTP 15454-SFP3-1-IR= OTU2-XP 10GE-XP(E) GE-XP(E) ADM-10G 10G MR DataMux 10G EFEC TXP 4x2.5G EFEC TXP 4x2,5G FEC MXP Product ID 2.5G MR DataMux 100M-2.5G MRTXP Cisco ONS 15454 MSTP Boards 4.5 ONS-SC-155-EL= 9.0 ONS-SI-155-SR-MM= 8.0 ONS-SI-155-I1= 9.
Brochure CWDM SFP modules will require mandatory CC-FTA use. 27: Only P/N version 02 is qualified on the Cisco ONS 15454 MSTP. 28: For DWDM XFP modules, “xx.x” ranges from 30.3 to 61.4. 29: 10GE Base ZR rate is supported starting by Release 8.5.1 35: P/N 10-2012-02 supports: 10G-1200-SM-LL-L / 10GE BASE-LR / 10GE BASE-LW / OC192 SR1 / STM-64 I-64.1 / OTU-2 at 10.7G P/N 10-2012-03 supports: 10G-1200-SM-LL-L / 10GE BASE-LR / 10GE BASE-WR / OC192 SR1 / STM-64 I.64 / OTU-2 at 10.7G, 11.05G and 11.
Brochure Cisco ONS 15300 Series Boards Product ID 15310-CL 15310-MA ONS-SI-622-I1= 15305 15310-CE-MR-6 7.0 7.0 ONS-SI-622-L1= 7.0 7.0 ONS-SI-622-L2= 7.0 7.0 ONS-SI-2G-S1= 7.0 ONS-SI-2G-I1= 7.0 ONS-SI-2G-L1= 7.0 ONS-SI-2G-L2= 7.0 ONS-SE-Z1= 15327 8.5 30 9.0 7.0 31 9.0 7.0 ONS-SE-155-xxxx ONS-SE-622-xxxx 31 9.033 ONS-SE-2G-xxxx ONS-SC-2G-xx.x= 32 7.0 30: For CWDM 155 Mbps SFP modules, “xxxx” ranges from 1470 to 1610.
Brochure Table 32.
Brochure DWDM Pluggables Table 37. xWDM SFP Modules Product ID MTBF Power Comsumption MAX (W) Supported Cable Connection ONS-SC-2G-xx.x= 5,346,554 1 LC-LC ONS-SC-Z3-xxxx= 2,070,393 1.1 LC-LC ONS-SE-155-xxxx= 5,346,554 1 LC-LC ONS-SE-622-xxxx= 5,346,554 1 LC-LC ONS-XC-10G-xx.x= 2,711,000 3.5 LC-LC Ordering Information All the available pluggable interfaces are orderable from Cisco.com. Please check the Pricing Tool for further information: http://www.cisco.com/cgi-bin/front.
Brochure End-of-Sale/End-of-Life Products Table 38 lists the Cisco SFP modules that have reached end-of-life or end-of-sale, followed by their replacement products. Table 38.