Specifications

25
Installing the GBIC, SFP, and XFP Optics Modules in Cisco ONS Platforms
78-11404-05
Related Documentation
c. Slide the GBIC out of the slot. A flap closes over the slot to protect the connector on the Gigabit
Ethernet card.
Step 4 If you are using an SFP/XFP:
a. If the SFP/XFP connector has a latch securing the fiber cable, pull it upward to release the cable.
b. Pull the fiber cable straight out of the connector.
c. Unplug the SFP/XFP connector and fiber from the card.
d. Slide the SFP/XFP out of the slot.
Related Documentation
Use the Installing the GBIC, SFP and XFP Optics Modules in Cisco ONS Platforms spare document in
conjunction with the following referenced publications as needed:
• Cisco ONS 15454 Procedure Guide
• Cisco ONS 15454 Reference Manual
• Cisco ONS 15454 Troubleshooting Guide
• Cisco ONS 15454 SDH Procedure Guide
• Cisco ONS 15454 SDH Reference Manual
• Cisco ONS 15454 SDH Troubleshooting Guide
• Cisco ONS 15454 DWDM Procedure Guide
• Cisco ONS 15454 DWDM Reference Manual
• Cisco ONS 15454 DWDM Troubleshooting Guide
• Cisco ONS 15600 Procedure Guide
• Cisco ONS 15600 Reference Manual
• Cisco ONS 15600 Troubleshooting Guide
• Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
• Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
• Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
• Cisco ONS 15327 Procedure Guide
• Cisco ONS 15327 Reference Manual
• Cisco ONS 15327 Troubleshooting Guide