Specifications

20
Installing the GBIC, SFP, and XFP Optics Modules in Cisco ONS Platforms
78-11404-05
GBIC, SFP and XFP Installation and Removal
XFP Port Cabling Specifications
GBIC, SFP and XFP Installation and Removal
This section provides installation and removal procedures for GBICs and SFPs/XFPs. Because GBICs
and SFPs/XFPs are hot-swappable they can be installed and removed while the card/shelf assembly is
powered and running.
Warning GBICs and SFPs/XFPs are Class I laser products. Statement 1008
Warning Invisible laser radiation could be emitted from the end of the unterminated fiber cable or connector.
Do not stare into the beam directly with optical instruments. Viewing the laser output with certain
optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of
100 mm could pose an eye hazard. Statement 1056
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Table 11 XFP Specifications
XFP Interface
Transmitter Output
Power Min/Max (dBm)
Receiver Input Power
Min/Max (dBm)
ONS-XC-10G-S1= OC-192/STM64
10GE/10GFC
-6 to -1
-8.2 to +0.5
-11 to -1
-14.4 to +0.5
ONS-XC-10G-I2= OC-192, STM-64 -1 to +2 -14 to +2
ONS-XC-10G-L2= OC-192, STM-64 0 to +4 -24 to -7
Table 12 SIngle-Mode Fiber XFP Port Cabling Specifications
XFP Wavelength Fiber Type Cable Distance
ONS-XC-10G-S1= 1310 nm SMF 10 km (6.2 miles) for
10GE/10GFC
2 km (1.2 miles) for
OC-192/STM64
ONS-XC-10G-I2= Transmitter:
1530 nm to 1565 nm
Receiver: 1260 nm to
1565 nm
SMF 40 km (25.80 miles) for
OC-192/STM64
ONS-XC-10G-L2= Transmitter:
1530 nm to 1565 nm
Receiver: 1260 nm to
1565 nm
SMF 80 km (49.71 miles) for
OC-192/STM64