Specifications

15
Installing the GBIC, SFP, and XFP Optics Modules in Cisco ONS Platforms
78-11404-05
SFP Description and Specifications
SFP Port Cabling Specifications
Table 9 provides cabling specifications for the SMF SFPs and Table 10 provides cabling specifications
for MMF SFPs that you install into interface cards. The ports of the listed SFPs have LC-type
connectors.
Note If you are using Software R6.2, this list of platforms, cards, and PPMs are not supported:
ONS15310-MA platform and related PPMs, CE1000-4 card and related PPMs, the ONS-XC-10G-L2=
PPM, MXP_2.5G_10E_L, MXP_2.5G_10E_C, TXP_MR_10E_L, TXP_MR_10E_C,
MXP_MR_10DME_C, and the MXP_MR_10DME_L cards. Also, the ONS-SE-200-MM= PPM is not
supported on the MXP_MR_2.5G and MXPP_MR_2.5G cards.
Table 8 SFP Dispersion Tolerance
Performance
Limits
Input Power
Range (dBm)
Dispersion
Tolerance
(ps/nm) Penalty (dB) OSNR
Power Limited
Performance
-28 to -9 -800 to +2400 Power Penalty: 3
Noise Penalty: 0
Optical signal to noise
ratio (OSNR) = 21 dB
at 0.1 nm BW
Noise Limited
Performance
-22 to -9 -800 to +2400 Noise Penalty: 3
Power Penalty: 0
OSNR = 19 dB at
0.1 nm BW
Table 9 Single-Mode Fiber SFP Port Cabling Specifications
SFP
Transmit
Wavelength
1
Fiber Type Cable Distance
ONS-SC-2G-30.3= 1530.33 nm 9 micron SMF N/A
2
ONS-SC-2G-31.1= 1531.12 nm 9 micron SMF N/A
2
ONS-SC-2G-31.9= 1531.90 nm 9 micron SMF N/A
2
ONS-SC-2G-32.6= 1532.68 nm 9 micron SMF N/A
2
ONS-SC-2G-33.4=
3
1533.47 nm 9 micron SMF N/A
2
ONS-SC-2G-34.2= 1534.25 nm 9 micron SMF N/A
2
ONS-SC-2G-35.0= 1535.04 nm 9 micron SMF N/A
2
ONS-SC-2G-35.8= 1535.82 nm 9 micron SMF N/A
2
ONS-SC-2G-36.6= 1536.61 nm 9 micron SMF N/A
2
ONS-SC-2G-38.1= 1538.19 nm 9 micron SMF N/A
2
ONS-SC-2G-38.9= 1538.98 nm 9 micron SMF N/A
2
ONS-SC-2G-39.7= 1539.77 nm 9 micron SMF N/A
2
ONS-SC-2G-40.5= 1540.56 nm 9 micron SMF N/A
2
ONS-SC-2G-41.3
3
1541.35 nm 9 micron SMF N/A
2
ONS-SC-2G-42.1= 1542.14 nm 9 micron SMF N/A
2
ONS-SC-2G-42.9= 1542.94 nm 9 micron SMF N/A
2