Specifications

ManualsBrandsCisco ManualsComputer equipment15454-SFP-LC-SX= - SFP Transceiver Module

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

InstallingtheGBIC,SFP,andXFPOpticsModules

in Cisco ONS Platforms

This document provides compatibility information and installation procedures for gigabit interface

converter (GBIC), small form-factor pluggable (SFP), and 10 Gigabit small form-factor pluggable

(XFP) optics modules used with the Cisco ONS 15454, 15454 SDH, 15327, 15600, 15310-CL, and

15310-MA nodes. It also contains removal instructions, cabling, and technical specifications. Use this

document in conjunction with platform-specific Cisco user documentation when working with GBICs

and SFPs/XFPs or any other system components.

GBICs and SFPs/XFPs are hot-swappable input/output devices that plug into a line card port to link the

port with the fiber-optic network. For all cards, the type of GBIC or SFP/XFP plugged into the card is

displayed in CTC and in TL1.

The sections included in this document are:

• Compatibility by Card, page 2

• GBIC Description and Specifications, page 6

–

GBIC Port Cabling Specifications, page 8

–

DWDM and CWDM GBICs, page 9

• SFP Description and Specifications, page 11

–

SFP Port Cabling Specifications, page 15

• XFP Description and Specifications, page 19

–

XFP Port Cabling Specifications, page 20

• GBIC, SFP and XFP Installation and Removal, page 20

–

Installing a GBIC or SFP/XFP, page 21

–

Connecting Single-Mode and Multimode Optical Fiber, page 23

–

Preprovision an SFP or XFP Slot, page 23

–

Provision a Multirate PPM, page 24

–

Removing a GBIC or SFP/XFP, page 24

• Related Documentation, page 25

• Obtaining Documentation, page 26

Summary of content (32 pages)

PAGE 1
Installing the GBIC, SFP, and XFP Optics Modules in Cisco ONS Platforms This document provides compatibility information and installation procedures for gigabit interface converter (GBIC), small form-factor pluggable (SFP), and 10 Gigabit small form-factor pluggable (XFP) optics modules used with the Cisco ONS 15454, 15454 SDH, 15327, 15600, 15310-CL, and 15310-MA nodes. It also contains removal instructions, cabling, and technical specifications.
PAGE 2
Compatibility by Card – Cisco.
PAGE 3
Compatibility by Card Table 1 GBIC, SFP, and XFP Card Compatibility (continued) Platform Card ONS 15310-MA CTX2500 Compatible GBIC, SFP or XFP Cisco Top Assembly Number (Cisco Product ID) (TAN) 155M SFP Optics ONS-SI-155-I1= ONS-SI-155-L1= ONS-SI-155-L2= 155M SFP Optics 10-1938-01 10-1957-01 10-1937-01 622M SFP Optics ONS-SI-622-I1= ONS-SI-622-L1= ONS-SI-622-L2= 622M SFP Optics 10-1956-01 10-1958-01 10-1936-01 2.5G SFP Optics ONS-SI-2G-I1= ONS-SI-2G-L1= ONS-SI-2G-S1= ONS-SI-2G-L2= 2.
PAGE 4
Compatibility by Card Table 1 GBIC, SFP, and XFP Card Compatibility (continued) Compatible GBIC, SFP or XFP Cisco Top Assembly Number (Cisco Product ID) (TAN) Platform Card ONS 15454 SONET/SDH E1000-2-G (ONS 15454 SONET only) E1000-2 15454-GBIC-SX= 15454E-GBIC-SX= 15454-GBIC-LX/LH= 15454E-GBIC-LX/LH= ONS-GC-GE-SX= ONS-GC-GE-LX= ONS-GC-GE-ZX= 30-0759-01 800-06780-011 10-1743-01 30-0703-01 10-2192-01 10-2191-01 10-2190-01 G1K-42 G1000-4 15454-GBIC-SX= 15454E-GBIC-SX= 15454-GBIC-LX/LH= 15454E-GBIC-L
PAGE 5
Compatibility by Card Table 1 GBIC, SFP, and XFP Card Compatibility (continued) Platform Card ONS 15454 SONET/SDH (Continued) MRC-12 Compatible GBIC, SFP or XFP Cisco Top Assembly Number (Cisco Product ID) (TAN) ONS-SC-2G-30.3= through ONS-SC-2G-60.
PAGE 6
GBIC Description and Specifications Table 1 GBIC, SFP, and XFP Card Compatibility (continued) Compatible GBIC, SFP or XFP Cisco Top Assembly Number (Cisco Product ID) (TAN) Platform Card ONS 15454 SONET/SDH (Continued) TXP_MR_2.5G TXPP_MR_2.5G 15454-SFP3-1-IR= 15454E-SFP-L.1.1= 15454-SFP12-4-IR= 15454E-SFP-L.4.1= 15454-SFP-OC48-IR= 15454E-SFP-L.16.
PAGE 7
GBIC Description and Specifications Caution Do not add labels or markings to the GBICs. Figure 1 GBICs with Clips (Left) and with a Handle (Right) Clip Handle Receiver Transmitter 51178 Receiver Transmitter Table 2 lists specifications for available GBICs (non-DWDM/CWDM). See the “DWDM and CWDM GBICs” section on page 9 for descriptions and specifications for DWDM and CWDM GBICs.
PAGE 8
GBIC Description and Specifications Table 2 GBIC Specifications (continued) Transmitter Output Power Min/Max (dBm) Receiver Input Power Min/Max (dBm) GBIC Interface ONS-GX-2FC-MMI= Short Reach Fibre Channel, 1 or 2 Gbps -9.5 to -5 -17 to 0 ONS-GX-2FC-SML= Long Reach Fibre Channel, 1 or 2 Gbps -9 to -3 -18 to -3 1. Operating temperature range for a card with CWDM/DWDM GBICs installed is limited to -5 to +40 degrees Celsius. Operation with CWDM/DWDM GBICs requires R4.
PAGE 9
GBIC Description and Specifications Table 3 Single-Mode Fiber GBIC Port Cabling Specifications (continued) GBIC Wavelength ONS-GX-2FC-SML= Long Reach 1310 nm 4 Fiber Type Cable Distance 9 micron SMF 10 km (6.2 miles) 50.0 micron SMF 62.5 micron SMF 225 m (738 ft) (with a mode conditioning patch cord for transmitter) 1. The 15454-GC-GE-ZX operates on SMF optic link spans of up to 80 km in length. Link spans of up to 100 km are possible using premium SMF or dispersion shifted SMF.
PAGE 10
GBIC Description and Specifications The ONS 15454-supported CWDM GBICs reach up to 100 to 120 km over single-mode fiber and support eight wavelengths as shown in Table 5.
PAGE 11
SFP Description and Specifications Figure 2 CWDM GBIC with Wavelength Appropriate for Fiber-Connected Device G1K FAIL ACT RX 1470-nm Input 1 TX ACT/LINK RX 2 TX Fiber Optic Connection ACT/LINK CWDM Mux RX 3 TX CWDM-GBIC-1470 ACT/LINK RX 4 TX 90957 ACT/LINK The Cisco ONS 15454 Procedure Guide contains specific procedures for attaching optical fiber to GBICs and inserting GBICs into the G-Series card.
PAGE 12
SFP Description and Specifications See the label on the SFP for technology type and model. One type of latch available is a mylar tab as shown in Figure 4, a second type of latch available is an actuator/button (Figure 5), and a third type of latch is a bail clasp (Figure 6). SFP dimensions are: • Height 0.03 in. (8.5 mm) • Width 0.53 in. (13.4 mm) • Depth 2.22 in. (56.
PAGE 13
SFP Description and Specifications Wide Bail Clasp SFP 151564 Figure 7 Table 7 lists specifications for available SFPs. Table 7 SFP Specifications SFP Interface Transmitter Output Receiver Input Power Power Min/Max (dBm) Min/Max (dBm) ONS-SC-2G-30.3= through ONS-SC-2G-60.
PAGE 14
SFP Description and Specifications Table 7 SFP Specifications (continued) SFP Interface Transmitter Output Receiver Input Power Power Min/Max (dBm) Min/Max (dBm) ONS-SI-2G-L2= OC-48, STM-16 -2 to +3 -28 to -9 ONS-SI-2G-S1= OC-48, STM-16 -10 to -3 -18 to -3 ONS-SI-622-I1= OC-12/OC-3, STM-4/STM-1 -15 to -8.0 -28 to -8 ONS-SI-622-L1= OC-12, STM-4 -3.0 to 2.0 -28 to -8 ONS-SI-622-L2= OC-12, STM-4 -3.0 to 2.0 -28 to -8 15327-SFP-LC-SX= Gigabit Ethernet -9.
PAGE 15
SFP Description and Specifications Table 8 SFP Dispersion Tolerance Performance Limits Input Power Range (dBm) Dispersion Tolerance (ps/nm) Power Limited Performance -28 to -9 Noise Limited Performance -22 to -9 Penalty (dB) OSNR -800 to +2400 Power Penalty: 3 Noise Penalty: 0 Optical signal to noise ratio (OSNR) = 21 dB at 0.1 nm BW -800 to +2400 Noise Penalty: 3 Power Penalty: 0 OSNR = 19 dB at 0.
PAGE 16
SFP Description and Specifications Table 9 Single-Mode Fiber SFP Port Cabling Specifications (continued) SFP Transmit Wavelength1 Fiber Type ONS-SC-2G-43.7= 1543.73 nm 9 micron SMF N/A2 ONS-SC-2G-44.5= 1544.53 nm 9 micron SMF N/A2 ONS-SC-2G-46.1= 1546.12 nm 9 micron SMF N/A2 ONS-SC-2G-46.9= 1546.92 nm 9 micron SMF N/A2 ONS-SC-2G-47.7= 1547.72 nm 9 micron SMF N/A2 ONS-SC-2G-48.5= 1548.51 nm 9 micron SMF N/A2 ONS-SC-2G-49.3=3 1549.32 nm 9 micron SMF N/A2 ONS-SC-2G-50.1= 1550.
PAGE 17
SFP Description and Specifications Table 9 Single-Mode Fiber SFP Port Cabling Specifications (continued) SFP Transmit Wavelength1 Fiber Type ONS-SE-622-1590= 1590 nm 9 micron SMF 100 km (62.14 miles) ONS-SE-622-1610= 1610 nm 9 micron SMF 100 km (62.14 miles) ONS-SE-2G-L2= 1550 nm 9 micron SMF 80 km (49.71 miles) ONS-SE-2G-S1= Short Reach 1310 nm 9 micron SMF 2 km (1.2 miles) ONS-SE-Z1= 1310 km 9 micron SMF 15 km (9.
PAGE 18
SFP Description and Specifications Table 9 Single-Mode Fiber SFP Port Cabling Specifications (continued) Transmit Wavelength1 Fiber Type 15454E-SFP-L.16.1= Short Haul 1310 nm 9 micron SMF 15 km (9.3 miles) 15454-SFP-GE+-LX=/ 15454E-SFP-GE+-LX= Long Reach 1310 nm 9 micron SMF 10 km (6.2 miles) for FC 1G, FC 2G and GE 5 km (3.1 miles) for HDTV SFP Cable Distance 1. Typical loss on a 1310 nm wavelength SMF is .6 dB/km. 2. ONS-SC-2G-xx.x cable distance varies depending on DWDM system installation.
PAGE 19
XFP Description and Specifications XFP Description and Specifications The 10 Gbps 1310 nm XFP transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at the following signaling rates: 9.95 Gbps, 10.31 Gbps, 10.51 Gbps, and 10.66/10.71/11.10 Gbps which apply to 10GBASE-LR (fibre channel and Ethernet) as well as OC-192/STM-64 SONET/SDH. The XFP integrates the receiver and transmit path.
PAGE 20
GBIC, SFP and XFP Installation and Removal Table 11 XFP Specifications XFP Interface Transmitter Output Power Min/Max (dBm) Receiver Input Power Min/Max (dBm) ONS-XC-10G-S1= OC-192/STM64 10GE/10GFC -6 to -1 -8.2 to +0.5 -11 to -1 -14.4 to +0.
PAGE 21
GBIC, SFP and XFP Installation and Removal Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Warning Before you install, operate, or service the system, read the Site Preparation and Safety Guide. This guide contains important safety information you should know before working with the system.
PAGE 22
GBIC, SFP and XFP Installation and Removal Note Step 3 Step 4 Before you install SFPs on the MRC-12 card, refer to the MRC-12 card information in the Cisco ONS 15454 Reference Manual for bandwidth restrictions based on the port where you install the SFP and the cross-connect card being used. Verify the type of GBIC, SFP, or XFP you are using: • If you are using a GBIC with clips, go to Step 4. • If you are using a GBIC with a handle, go to Step 5. • If you are using an SFP or XFP, go to Step 6.
PAGE 23
GBIC, SFP and XFP Installation and Removal Connecting Single-Mode and Multimode Optical Fiber Attach the appropriate optical fiber cable directly to the SC-type receptacle on the GBIC or the LC-type connector on the SFP/XFP. You can use either simplex or duplex connectors for most devices. For simplex connectors, two cables are required, one cable for transmit (Tx) and a second cable for receive (Rx). For duplex connectors, only one cable that has both Tx and Rx connectors is required.
PAGE 24
GBIC, SFP and XFP Installation and Removal Provision a Multirate PPM This task provisions a multirate PPM. Prior to performing this procedure, make sure you have logged into CTC. Note If the PPM was preprovisioned using the “Preprovision an SFP or XFP Slot” task on page 23 this task is unnecessary, unless the PPM has an Out-of-Service and Autonomous Management, Unassigned (OOS-AUMA,UAS) (ANSI) or unlocked-disabled, unassigned (ETSI) service state.
PAGE 25
Related Documentation c. Step 4 Slide the GBIC out of the slot. A flap closes over the slot to protect the connector on the Gigabit Ethernet card. If you are using an SFP/XFP: a. If the SFP/XFP connector has a latch securing the fiber cable, pull it upward to release the cable. b. Pull the fiber cable straight out of the connector. c. Unplug the SFP/XFP connector and fiber from the card. d. Slide the SFP/XFP out of the slot.
PAGE 26
Obtaining Documentation Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/techsupport You can access the Cisco website at this URL: http://www.cisco.
PAGE 27
Documentation Feedback Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m. (0800 to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by calling 011 408 519-5055. You can also order documentation by e-mail at tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001.
PAGE 28
Obtaining Technical Assistance • Nonemergencies — psirt@cisco.com In an emergency, you can also reach PSIRT by telephone: Tip • 1 877 228-7302 • 1 408 525-6532 We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x. Never use a revoked or an expired encryption key.
PAGE 29
Obtaining Additional Publications and Information Submitting a Service Request Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions.
PAGE 30
Obtaining Additional Publications and Information • Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL: http://www.ciscopress.com • Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments.
PAGE 31
Obtaining Additional Publications and Information This document is to be used in conjunction with the documents listed in the “Related Documentation” section. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.
PAGE 32
Obtaining Additional Publications and Information Installing the GBIC, SFP, and XFP Optics Modules in Cisco ONS Platforms 32 78-11404-05