Datasheet

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 25
Standard Title
Ethernet
IEEE 802.1D
IEEE 802.1Q
IEEE 802.1ad
IEEE 802.3ab
IEEE 802.3ae
MEF 9
MEF 14
ITU-T Y.1731
IEEE Standard for local and metropolitan area networks — Media access control
(MAC) Bridges
IEEE Standard for Local and Metropolitan Area Networks — Virtual Bridged Local
Area Networks
Amendment to IEEE 802.1Q-2005. IEEE Standard for Local and metropolitan area
networks — Virtual Bridged Local Area Networks
1000BASE-T Gbit/s Ethernet over twisted pair at 1 Gbit/s (125 MB/s)
10 Gbit/s (1,250 MB/s) Ethernet over fiber; 10GBASE-SR, 10GBASE-LR, 10GBASE-
ER, 10GBASE-SW, 10GBASE-LW, 10GBASE-EW
Abstract Test Suite for Ethernet Services at the UNI
Abstract Test Suite for Traffic Management Phase 1
OAM functions and mechanisms for Ethernet based networks
SONET, SDH and OTN
ITU-T G.707
ITU-T G.709
ITU-T G.781
ITU-T G.783
ITU-T G.784
ITU-T G.798
ITU-T G.805
ITU-T G.811
ITU-T G.812
ITU-T G.813
ITU-T G.823
ITU-T G.824
ITU-T G.825
ITU-T G.8251
ITU-T G.841
ITU-T G.872
ITU-T G.957
ITU-T G.959.1
ITU-T G.Sup43
ITU-T G.7041
ANSI T1.105
Network node interface for the synchronous digital hierarchy (SDH)
Interfaces for the Optical Transport Network (OTN)
Synchronization layer functions
Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks
Synchronous digital hierarchy (SDH) management
Characteristics of optical transport network hierarchy equipment functional blocks
Generic functional architecture of transport networks
Timing characteristics of primary reference clocks
Timing requirements of slave clocks suitable for use as node clocks in
synchronization networks
Timing characteristics of SDH equipment slave clocks (SEC)
The control of jitter and wander within digital networks which are based on the 2048
kbit/s hierarchy
The control of jitter and wander within digital networks which are based on the 1544
kbit/s hierarchy
The control of jitter and wander within digital networks which are based on the
synchronous digital hierarchy (SDH)
The control of jitter and wander within the optical transport network (OTN)
Types and characteristics of SDH network protection architectures
Architecture of optical transport networks
Optical interfaces for equipments and systems relating to the synchronous digital
hierarchy
Optical transport network physical layer interfaces
Transport of IEEE 10GBASE-R in optical transport networks (OTN)
Generic framing procedure (GFP)
Synchronous Optical Network (SONET) – Basic Description including Multiplex
Structure, Rates, and Formats
Ordering Information
To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco
Software Center.
Table 8 provides ordering information.
Table 8. Ordering Information
Product ID Description
Common Equipment
15454-SA-HD=
15454-SA-HD-DDR=
15454E-SA-ETSI=
Shelf assembly, Cisco ONS 15454
15454-TCC2P-K9=
15454E-TCC2P-K9=
Timing, Communications, and Control Card, Version 2 Plus (TCC2P)