Technical data

TraverseEdge 2020 Applications and Engineering Guide, Chapter 11: Interoperability
Release 5.0.x Turin Networks Page 11-5
ture (Gateway IP is OSIRIS DCC Port).
Figure 11-5 Typical IP Addressing Structure
Procedures for provisioning NMS management ports on the TE-2020 (ETH-R1/R2) and OSIRIS are pro-
vided in the TE-2020 Users Guide.
11.1.5 Cisco DCN Interoperability
Both TE-2020 and 15454 nodes can co-exist on a UPSR ring using standard section DCC for interopera-
bility. Each system's craft and EMS tools can access that system's network elements without restriction.
However, Turin Networks NEs will not be visible to Cisco craft tools (and vice-versa). This requires (at a
minimum) one TL1 login per 15454 and one login per
TE-2020 DCC routing will utilize OSPF and will
survive fiber cuts etc
Refer to Figure 12-8 for an example
TE-2020/Cisco interoperability network.