Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 8
Figure 1. Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card
The Cisco CE-MR card includes the following features:
●
Ten multirate SFP-based Ethernet ports
●
Support for 10/1000/1000 Mbps SFP optics: 10/100/1000 Mbps BASE-T; 100 Mbps FX, LX,
BX; 1000 Mbps SX, LX, ZX
●
10-Gbps SONET/SDH transport bandwidth per card
●
Each multirate Ethernet port mapped to SONET/SDH (POS) using GFP-F (ITU-T G.7041)
or LAN Extension (LEX) High-Level Data Link Control (HDLC) encapsulation
●
Each POS can consist of high-order (HO) VCAT (SONET: STS-1-nv where n=1 to 21, STS-
3C-nv where n=1 to 7; SDH: VC-4-nv where n=1 to 7), (LO) VCAT (SONET: Vt1.5-nv where
n=1 to 64; SDH: VC-3-nv where n=1 to 21, VC12 where n=1 to 63) or contiguous
concatenation (CCAT) (SONET: STS-1, -3c, -6c, -9c, -12c, -24c, -48c; SDH: VC-4, -4-2c, -
4-3c, -4-4c, -4-8c, -4-16c) circuits
●
Dynamic capacity increment/decrement (LCAS or SW-LCAS) to VCAT circuits
●
Sub-50-millisecond (ms) SONET/SDH protection/restoration of CCAT transport circuits
●
Transparent to Layer 2 bridging, switching, Ethernet MAC control protocols (Cisco
EtherChannel® technology, 802.1x, Cisco Discovery Protocol, VLAN Trunking Protocol
[VTP], Spanning Tree Protocol), and VLAN (802.1Q and QinQ)
●
Ethernet link functions: autonegotiation, link speed auto sense, full/half duplex, flow control
(802.3x)