Specifications

5-29
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
Command Summary
SRESET Software Reset This command initiates a reboot
of the EDFA.
This command should only be
used if the EDFA has entered an
inconsistent state.
STAT [interval],
1-255 sec
Displays the control
mode of each pump
and then periodically
displays pump and
EDFA status.
This command provides a
continuous display of all
monitored parameters. You can
set the period between updates
from 1 to 255 seconds. It is
specified as an argument to the
STAT command.
Type Ctrl-X to return to the
prompt from the status display.
VER Version Display This command displays general
information about the EDFA.
Table 5-17 Command Summary (continued)
Command Syntax Function Description