Specifications

5-26
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
Command Summary
Command Summary
Table 5-17 summarizes all the user commands presented in this chapter. Commands are listed in
alphabetical order.
Table 5-17 Command Summary
Command Syntax Function Description
@XY Login to unit with
XY address
To begin a command session,
first log into the EDFA module.
Typing the @ character while
already logged into a unit
immediately terminates the
command session.
ALARM D
ALARM C
Alarm Status Display
Alarm Status Clear
This command displays the
alarm status.
This command clears all of the
alarm counts.
ALMDSBL<name>
1|2
ALMENBL<name>
1|2
Alarm Enable
/Disable
This command disables alarm
number n.
This command enables alarm
number n.
Unless saved with the
CONFIG S command, the
alarm remains disabled/
enabled until the next reset.
CONFIG S Configuration Save
Command
This command saves the current
settings.
CUTOVER Firmware Cutover This command switches
operation from the active plane
to the inactive plane to install a
new version of firmware.
HELP Command Display This command displays a list of
commands available to the user.