Specifications

5-24
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
Maintenance Commands
SETADDR
Explanation:
Enter SETADDR<xx> to assign an address to the EDFA module (Example 5-21).
Example 5-21 SET ADDR Command:
0-0>SETADDR xy
x-y>
Use Table 5-14 to interpret and issue SETADDR commands.
SRESET
Explanation:
The SRESET command reboots the EDFA.
Command: SETADDR
Syntax: SETADDR xx, where xx is decimal number
Password: N/A
Configuration: Yes
Brief
Description:
Sets the address of the ONS 15216 EDFA1. This command
enables a unique address to be assigned to each EDFA in
systems where two or more ONS 15216 EDFA1s are used
within one networking platform.
Table 5-15 EDFA Address Parameters
Parameter Format Description
x 0-9 First half of EDFA address
y 0-9 Second half of EDFA address
Command: SRESET
Syntax: SRESET
Password: N/A
Configuration: N/A
Brief
Description:
Software reset for EDFA