Specifications

5-22
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
Maintenance Commands
Figure 5-2 CUTOVER Command Diagram
Use Table 5-13 to interpret the CUTOVER command details.
LOAD
Cutover from ver.aaaa to ver.bbbb
Are you sure? (Y/N)
Configuration is not saved.
Do you want to save current configuration? (Y/N)
Executing CONFIG S
Are you
Sure? (Y/N))
Cancelled
Executing Cutover. You will be logged out.
Wait 10 seconds, then push any key to logon
YES (Config modified)
NO
YES
YES
YES
NO
NO
(Config unmodified)
61976
Table 5-13 Active/Inactice Plane Parameters
Parameter Format Description
aaaa %4.2f Active plane firmware version.
This must be allowed to grow
%5.2f in the future.
bbbb %4.2f Inactive plane firmware version.
This must be allowed to grow
%5.2f in the future.
Command: LOAD
Syntax: LOAD Start|Abort|Report
Password: Yes
Configuration: N/A
Brief
Description:
Download firmware to the EDFA