Specifications

5-16
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
Setup Commands
Setup Commands
The following section describes setup commands.
SET_LOSTH
Explanation:
This command performs the following three functions:
• Sets and enables the loss-of-optical-input signal threshold
• Obtains and displays the current loss-of-optical-input signal threshold
• Disables the loss-of-optical-input signal alarm
Figure 5-1 The following example displays the SET_LOSTH command.
Example 5-13 SET LOSTH Command:
0-0>SET_LOSTH aaa.aa
OK
0-0>SET_LOSTH
bbb.bbdBm
0-0>SET_LOSTH D
OK
0-0>
Use Table 5-9 to interpret the results of a SET_LOSTH command
.
Command: SET_LOSTH
Syntax: SET_LOSTH [D|<value, -15 to -31dBm>]
Password: Yes
Configuration: Yes
Brief Description: Set, get, or disable the loss-of-signal threshold
Table 5-9 LOS Threshold Parameters
Parameter Format Description
aaa.aa %6.2f Setpoint LOS Threshold
bbb.bb %6.2f Current LOS Threshold
The value returned by SET_LOSTH.
This accounts for rounding and table
look-up accuracy.