Specifications

5-15
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
System Commands
Figure 5-1 CONFIG S Command Path Diagram
Note Following the Y path above, only "Saved" will be returned, followed by a new line. Following the N path
above, "Cancelled" is returned with a prompt.
LOGOUT
Explanation:
The LOGOUT command returns the current prompt and terminates the command line interface serial
session. The ONS 15216 EDFA1 will not respond to any further commands unless you perform a login
or address bootstrap.
Example 5-12 LOGOUT Command:
0-0>LOGOUT
0-0>
Warning Configuration changes are lost at LOGOUT unless these changes are saved using the CONFIG S
command (CONFIG, page 5-14).
Command: LOGOUT
Syntax: LOGOUT
Password: N/A
Configuration: N/A
Brief Description: Logout of current session
0-0>CONFIG S
You are about to change saved configuration!
Are you sure? (Y/N)
0-0>CONFIG S
You are about to change saved
configuration!
Are you sure? (Y/N) Saving, wait...
Saved
0-0>CONFIG S
You are about to change
saved configuration!
Are you sure? (Y/N)
Cancelled
0-0>
Yes No
61975