Specifications

5-9
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
System Status Commands
PRM
Example 5-8 PRM Command:
0-0>PRM 1
1 aaa.a/bb.b ccccc ddd.dd eeee.ee ff.ff ggg.g hhhh.h/iiii.ii jjjj.jj/kkk.kk lll.l
0-0>PRM 2
2 aaa.a/bb.b ccccc ddd.dd eeee.ee ff.ff ggg.g hhhh.h/iiii.ii jjjj.jj/kkk.kk lll.l
0-0>
Note Note: White space, asterisks, and forward slashes are required field delimiters.
Use the following formats to specify displayed parameters such as width, precision, and type:
• %[width].[precision]type,
• Width -total field width
Temp Compensated Temperature compensated constant
gain mode
Idle Control is off. Pump current set to
zero.
xxx 0..300 Pump bias current range for constant
pump current mode
yyy 0..100 Pump power range for constant pump
power mode
zz 0..65 EDFA power range for constant EDFA
output power mode
Command: PRM
Syntax: PRM 1|2
Password: N/A
Configuration: N/A
Brief
Description:
Displays the latest measurements for the specified laser
pump and EDFA
Explanation:
When the PRM 1|2 command is entered, the parameters for
pump 1 and 2 are displayed. (see Example 5-8). This
command displays the same line of parameters as the STAT
command without the header and one line at a time.
Table 5-6 Laser Diode Pump Parameters
Parameter Value Description