Specifications

5-8
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
System Status Commands
Example 5-6 HELP command results:
0-0>HELP
System Status System Commands Setup Commands Maintenance
------------------------------------------------------------------------
ALARM ALMDSBL SET_LOSTH CUTOVER
HELP ALMENBL SETGT LOAD
LD CONFIG SETI SETADDR
PRM LOGOUT SETOUT SRESET
STAT PASS SETP
VER
------------------------------------------------------------------------
Enter 'Command ?' for syntax
0-0>
LD
Example 5-7 LD Command:
0-0>LD
LD n: mmmmmmmmmmmmmmmmmmmmmmmm
LD n: mmmmmmmmmmmmmmmmmmmmmmmm
0-0>
Command: LD
Syntax: LD
Password: N/A
Configuration: N/A
Brief
Description:
Display the control mode of each laser diode pump.
Explanation:
Displays the current laser status (see Example 5-7). Laser
modes of operation are listed in Table 5-6.
Table 5-6 Laser Diode Pump Parameters
Parameter Value Description
n 1.2 Laser diode pump number
mmmm... Const Pump Crnt
xxx(mA)
Constant current mode
Const Pump Power
yyy(mW)
Constant pump power mode
Const Outp Power
zz(mW)
Constant output power mode. Only
Pump laser 2 may be in this mode.