Specifications

5-4

Cisco ONS 15216 EDFA Operation Guide

78-12818-01

Chapter 5 Command Line Reference

• Type- float (f) or signed decimals (d)

Additional information regarding measurement parameters can be found in the “PRM” section on

page 5-9.

@XY

Explanation:

To begin a command session, you need to log in to the ONS 15216 EDFA1. Typing the ’@’ character

while logged into a unit immediately terminates the command session. Table 5-2 displays the

ONS 15216 EDFA1 address parameters.

Example 5-2 @XY Command:

@xy

x-y>

Note The Default Address for the ONS 15216 EDFA1 is 00.

To begin a session, enter @xy followed by a carriage return (where xy is the address of the module). The

address of the ONS 15216 EDFA1 is a two-digit number from 00 to 99. In this document, the default

address 00 is used for the ONS 15216 EDFA1.

The ONS 15216 EDFA1 ends every command by returning the following prompt: a-b> (where ab is the

address of the ONS 15216 EDFA1). The prompt does not appear with the following commands:

• CONFIG

Command: @XY

Syntax: None given

Password: N/A

Configuration: N/A

Brief Description: Login to unit with address XY

Table 5-2 EDFA Address Parameters

Parameter Format Description

x 0-9 First half of EDFA address

y 0-9 Second half of EDFA address