Specifications

5-2
Cisco ONS 15216 EDFA Operation Guide
78-12818-01
Chapter 5 Command Line Reference
ONS 15216 EDFA1 Operation
Note With the exception of a power reset, Special Operations commands will not interrupt service.
Software Reset 12 seconds All alarm checking,
except loss of input
power, is stopped. Alarm
states are retained.
Loop control
suspended while
software restarts.
Power Reset 12 seconds Alarms set to voltage
LOW (VLO) within 1
second after power is
applied and 5V supply
stable.
Loop control not
yet initialized.
Table 5-1 Special Operations
Special
Operation Duration Alarm Impact
Control Loop
Impact