Specifications

6-10
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 6 CLI Commands
SNMP Commands
• 2 current versions of software (15216EdfaSw_x.x.x)
• snmp.cfg
Because the snmp.cfg file contains important SNMP attributes, deleting this file would mean that the
community and view tables would have to be reset before a remote user could access the ONS 15216
EDFA2 via SNMP.
Note EDFA software image files are named using a special naming convention. Do not to change the file name
when image files are downloaded from an FTP server onto the box in the field when using the FTP
command shell of the ONS 15216 EDFA2.
SNMP Commands
The SNMP commands are useful in working with the SNMP protocol to provision and configure the
ONS 15216 EDFA2. When issuing these SNMP commands, the command syntax requires that the
command must be followed by either the ONS 15216 EDFA2 IP address or the word "local”.
SNMP commands are listed as follows:
• snmp attribute get Command, page 6-10
• snmp attribute list Command, page 6-11
• snmp attribute set Command, page 6-12
• snmp mib display Command, page 6-12
• snmp mib get Command, page 6-12
• snmp row display Command, page 6-13
• snmp row get Command, page 6-14
• snmp row set Command, page 6-14
• snmp session community get Command, page 6-15
• snmp session community set Command, page 6-15
• snmp session transmission set Command, page 6-16
• snmp session transmission get Command, page 6-15
• snmp session version get Command, page 6-16
• snmp subtree display Command, page 6-16
• snmp subtree get Command, page 6-17
• snmp table display Command, page 6-18
• snmp table get Command, page 6-19
• snmp table list Command, page 6-19
snmp attribute get Command
Command: snmp attribute get