Specifications

CHAPTER
6-1
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
6
CLI Commands
This chapter is a reference of all CLI commands that are used in advanced setup and troubleshooting.
For provisioning the ONS 15216 EDFA2, see Chapter 4, “Provisioning”.
The commands discussed in this chapter are available to default users. There are four default users,
operator, Cisco15 (admin), root, and monitor. Each user level has a different password and a different
set of commands available. For default user and password for user levels, see Table 3-5 on page 3-11.
Table 6-1 lists all CLI commands supported by the ONS 15216 EDFA2. Each command is discussed in
more detail after the table.
.
Table 6-1 ONS 15216 EDFA2 Supported Commands
Command Description
srom cfg boot display Displays the serial ROM boot content. See srom cfg
boot display Command, page 6-4.
srom cfg boot modify Modifies the serial ROM boot contents. See srom cfg
boot modify Command, page 6-4.
srom cfg ip display Displays the serial ROM IP contents. See srom cfg ip
display Command, page 6-5.
srom cfg ip modify Modifies the serial ROM IP contents. See srom cfg ip
modify Command, page 6-5
pdm busmode display Displays the bus mode (simplex or duplex). See pdm
busmode display Command, page 6-5
pdm busmode modify Modifies the bus mode (simplex or duplex). See pdm
busmode modify Command, page 6-6
pdm cfg threshold display Displays power voltage threshold. See pdm cfg
threshold display Command, page 6-6
pdm cfg threshold bus
modify
Modifies power bus voltage. See pdm cfg threshold
bus modify Command, page 6-6
clear Clears the shell screen. See clear Command, page 6-7.
exit Exits the shell. See exit Command, page 6-7.
help Gives help about commands. See help Command, page
6-7.
history Displays the history list. See history Command, page
6-7.