Specifications

5-20
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 5 SNMP MIB Installation and Configuration
Retrieving Information
Table 5-16 describes the attributes displayed by these commands.
Power Gain
Command: snmp attribute get local cerentEdfa15216EdfaConstGainOverallGain
Syntax: snmp attribute get local cerentEdfa15216EdfaConstGainOverallGain #
Description: Displays the ONS 15216 EDFA2 overall power gain when the EDFA is in a constant gain
mode.
The following commands access overall power gain when in the constant gain mode:
• snmp row display local cerent15216EdfaOverallControl command
• snmp row get local cerent15216EdfaOverallControl command
The cerent15216EdfaConstGainOverallGain attribute in cerent15216EdfaOverallControl display
command shows the ONS 15216 EDFA2 power gain (Example 5-10).
Example 5-10 cerent15216EdfaOverallControl Display Command
hostname:ONS15216 EDFA2>snmp row display local cerent15216EdfaOverallControl
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaOverallControl ::= {
cerent15216EdfaConstGainOverallGain = 230;
cerent15216EdfaVariableGainPreAttenuation = 0;
};
For information about all of the parameters in the cerent15216EdfaStatusGroup, refer to Table 5-8.
Table 5-16 cerent15216EdfaRtcDateAndTime Command Attributes
Attribute Description
cerent15216EdfaRtcDateAndTimeLocal The current local time. Setting this value changes
the time according to the
cerent15216EdfaRtcDateAndTimeTimezone and
cerent15216EdfaRtcDateAndTimeSaving values.
The time zone and saving fields of this attribute are
in the set command.
cerent15216EdfaRtcDateAndTimeGMT The current GMT time.
cerent15216EdfaRtcDateAndTimeLocalSt
ring
The current local time.
cerent15216EdfaRtcDateAndTimeGMTSt
ring
The current GMT time.
cerent15216EdfaRtcDateAndTimeTimezo
ne
The time zone in hours from GMT.
cerent15216EdfaRtcDateAndTimeSaving The current daylight saving offset in minutes.
cerent15216EdfaRtcDateAndTimeFormsS
tring
The current local time.