Specifications

5-15
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 5 SNMP MIB Installation and Configuration
Tables and Groups
cerent15216EdfaOpGroup Table
The cerent15216EdfaOpGroup Table is used to display or set operation actions, such as saving
configuration or loading new software. The individual variables in Table 5-12 are generally used instead
of the Table command. That is, when performing a cutover command, the user would use the snmp
attribute set local cerent15216EdfaOpCutover perform command.
Table 5-11 cerent15216EdfaAlarmEntry Variable Descriptions
Variable Syntax
Maximum
Access Description
cerent15216EdfaAlarmIndex cerent15216EdfaIndex Not
Accessible
A unique value to
identify this entry.
cerent15216EdfaAlarmID AutonomousType Read-only The alarm this entry
refers to.
cerent15216EdfaAlarmPriority cerent15216EdfaAlarmPriority Read-only The priority of this
alarm.
cerent15216EdfaAlarmState cerent15216EdfaAlarmState Read-only The reporting state
of this alarm.
cerent15216EdfaAlarmEnableS
tatus
cerent15216EdfaControl Read-write If the alarm is
enabled/disabled.
cerent15216EdfaAlarmDateAn
dTime
Cerent15216EdfaDateAndTime
String
Read-only The local date and
time when the
alarm entered its
current state.
Table 5-12 cerent15216EdfaOpGroup Variable Descriptions
Variable Syntax
Maximum
Access Description
cerent15216EdfaOpStatus cerent15216EdfaActionStatus Read-only The status of the current operation.
cerent15216EdfaOpResult Integer Read-only This value is used to save the error result
(if any) of the last operation.Success is
indicated by a value of 0.
cerent15216EdfaOpRequestId Integer Read-write The request identifier for this operation.
This is provided to allow managers to
match actions and results.
cerent15216EdfaOpCutover cerent15216EdfaAction Read-write When “perform” is written to this object,
firmware is executed from the current
plane and the alternate plane status is
changed to the default active plane.
cerent15216EdfaOpLoad cerent15216EdfaAction Read-write When “perform” is written to this object,
new firmware is downloaded. Before
setting this attribute, the source of the new
firmware should be specified by setting
cerent15216EdfaOpSrcFileName and
cerent15216EdfaOpTftpSrvAddr.