Specifications

5-9
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 5 SNMP MIB Installation and Configuration
Tables and Groups
{
cerent15216EdfaCommIndex = 1;
cerent15216EdfaCommName = "private";
cerent15216EdfaCommViewIndex = 1;
cerent15216EdfaCommPrivileges = 255;
cerent15216EdfaCommSrcIPAddr = 0.0.0.0;
cerent15216EdfaCommNetMask = 255.255.255.255;
cerent15216EdfaCommStatus = active;
};
Table 5-5 displays the decimal values for the following SNMP operations.
For example, 255 is the sum of all decimal values and specifies access to all SNMP operations. This sum
is the default private community. 247 is the sum for all SNMP operations with the exception of the Set
operation. This sum is the default public community.
Tables and Groups
The cerent15216Edfa.mib contains several key tables that are used to review and provision the ONS
15216 EDFA2. The following tables are listed and described in the following sections:
• cerent15216EdfaCfgGroup Table, page 5-10
• Use the snmp attribute set local cerent15216EdfaOpSaveConfig perform command to save changes.,
page 5-11
• cerent15216EdfaOverallStatusGroup Table, page 5-12
• cerent15216EdfaOverallControl Table, page 5-13
• cerent15216EdfaPumpStatusEntry, page 5-13
• cerent15216EdfaAlarmEntry Table, page 5-14
• cerent15216EdfaOpGroup Table, page 5-15
• cerent15216EdfaVersionGroup Table, page 5-16
Table 5-5 SNMP Operation Decimal Values
SNMP Operation Decimal Values
Get 1
GetNext 2
Response (enable for all community strings) 4
Set 8
SNMPv1-Trap 16
GetBulk 32
Inform (enable for all community strings) 64
SNMPv2-Trap (enable for all community strings) 128