Specifications

4-11
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 4 Provisioning
Set Password
Set Password
To restrict access to the ONS 15216 EDFA2, use the user passwd modify command to change the
default user password. Example 4-7 displays the user passwd modify syntax. Enter the user passwd
modify command followed by a space, the default password followed by a space, and the new password
(as displayed in Example 4-7.
With the exception of the monitor level (read-only) user, the user can only modify the password for their
assigned level. For additional information on user levels, refer to Table 3-5.
Example 4-7 Changing Password
Cisco15216Edfa:ONS15216 EDFA2> user passwd modify old password new password
Note The default user name for the administrator level is CISCO15 with no default password. To start a
session for this user name, press Enter.
Save Changes
To ensure that your provisioning changes are set, you must save your changes prior to terminating the
session. To save changes, use the snmp attribute set local cerent15216EdfaOpSaveConfig perform
command (Example 4-8). Example 4-9 displays the command response.
Example 4-8 snmp attribute set local cerent15216EdfaOpSaveConfig Command
Cisco15216Edfa:ONS15216 EDFA2> snmp attribute set local cerent15216EdfaOpSaveConfig
idle
perform
abort
Example 4-9 snmp attribute set local cerent15216EdfaOpSaveConfig Command Response
Cisco15216Edfa:ONS15216 EDFA2> snmp attribute set local cerent15216EdfaOpSaveConfig
perform
Cisco15216Edfa:ONS15216 EDFA2>
Your changes are now saved.
Logoff
At the end of a session, the user must log off of the Cisco ONS 15216 EDFA2. To logoff, simply use the
logoff command. This is shown in Example 4-10.
Example 4-10 logoff Command
Cisco15216Edfa:ONS15216 EDFA2> logoff