Specifications

Contents

Cisco ONS 15216 EDFA2 Operations Guide

78-13908-02

Standard Precautions 3-1

Placement and Power Connection 3-1

General Rack Hazards 3-1

Rack Installation and Power Supply Procedures 3-2

Communications 3-2

Alarm Relay Contacts (RJ-45) 3-3

Alarm Connection Procedure 3-3

LED Alarm Definitions and Functions 3-4

SC/UPC Optical Ports 3-5

Safety Requirements 3-5

Optical Connection Procedure 3-6

Optical Amplification Operation Verification Procedure 3-6

Serial Interface (RS-232) – Local and Remote and Communication via Modem or Telnet 3-7

Required Equipment 3-7

RS-232 Connection Procedure 3-7

Remote Communication Setup 3-11

Remote Communication Component Requirements 3-11

Modem Signals 3-12

Modem Power Up 3-12

Configuration Settings 3-13

Setting and Saving Modem Settings 3-14

PC to ONS 15216 EDFA2 Direct Connection 3-14

Telnet Session 3-15

Connecting Through Telnet Procedure 3-15

CHAPTER

4 Provisioning 4-1

Set the IP Address Procedure 4-2

Connect Through a Telnet Session Procedure (Optional) 4-3

Set Power Bus Mode (Simplex or Duplex) 4-3

Verify Amplifier Operational Status 4-3

Set Gain 4-4

Set Alarm Thresholds 4-4

Set Password 4-11

Save Changes 4-11

Logoff 4-11