Specifications

3-9
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 3 Installation
Communications
Step 8 Click Connect To tab in the Optical Amplifier Properties dialog box as shown in Figure 3-4.
Figure 3-4 Optical Amplifier Properties Dialog Box (Connect To Tab)
Step 9 Ensure that Direct to Com1 is selected in the Connect using field.
Step 10 Click Settings (Figure 3-5) and click ASCII Setup.
Figure 3-5 Optical Amplifier Properties Dialog Box
Step 11 Configure the ASCII Setup window as shown in Figure 3-6. Click OK when done.