Specifications

3-8
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 3 Installation
Communications
Figure 3-2 HyperTerminal Connect To Dialog Box
.
Step 6 Configure the Port Settings in the COM1 Properties dialog box as shown in Figure 3-3. The Port Settings
must be configured as follows:
• Bits per second—19200
• Data bits—8
• Parity—None
• Stop bits—1
• Flow control—None
Click OK when done.
Figure 3-3 HyperTerminal COM1 Properties Dialog Box
Step 7
In the HyperTerminal main window, click File > Properties.