Specifications

2-6
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 2 Technical Specifications
Front Panel
Table 2-5 ONS 15216 EDFA2 Front Panel Features
Feature Description
Terminal strip Terminal strip for supplying power to the ONS 15216 EDFA2. Attach
AWG 18 stranded power wires to appropriate terminals.
Threaded grounding holes Threaded grounding holes (#10/32) to ground the ONS 15216 EDFA2.
Alarm Out RJ-45 connector used for alarm system connection. (See the “Alarm
Relay Contacts (RJ-45)” section on page 3-3 for additional
information.)
Serial port connection RS-232 Serial port for local or remote (modem) data communication
connection. (See Chapter 4 for additional information.)
Label Laser warnings, designation labels, and power level warning
Status LEDs LEDs indicating status of power, fail, loss of signal, Ethernet link
availability and Ethernet link traffic. (See the “LED Alarm Definitions
and Functions” section on page 3-4.)
Fiber input SC/UPC fiber input port.
Fiber output SC/UPC fiber output port.
Monitor output SC/UPC port for fiber that taps off 1% of output signal for monitoring
purposes.
Chassis ground lugs Rear panel grounding post to attach chassis ground wire using #8/32
nut.
LAN RJ-45 connector used for 10BaseT Ethernet connection. For more
information, see the “Telnet Session” section on page 3-15.