Specifications

6-22
Cisco ONS 15216 EDFA2 Operations Guide
78-13908-02
Chapter 6 CLI Commands
User Commands
Description: Type the user file display command to display a list of all the users and user information.
Type the user name display command to display the name of the current user. There can
be up to 100 different security levels. The number 100 sets the maximum level of
privileges and the number 0 sets the lowest level of privileges.
For information about user levels, see Table 3-5 on page 3-11.
The password for each user should be changed immediately after logging in as that default
user. See Example 6-31.
Example 6-31 user file display and user name display Commands
hostname:ONS15216 EDFA2> user file display
User Level Type
root 50 run_shell
monitor 20 run_forms
operator 30 run_forms
admin 40 run_forms
CISCO15 40 run_forms
user passwd set Command
Command: user passwd set
Syntax: user passwd set old_password new_password
Description: Sets the password. To change a password, type the active password, a space, and then the
new password. Typing the command without the passwords displays the parameters for
this command. Type the command, the first few letters of the attribute, and press Tab to
view a list of attributes that can be set. See Example 6-32.
Example 6-32 user passwd set Command
hostname:ONS15216 EDFA2> user passwd set rw secret
user active list Command
Command: user active list
Syntax: user active list
Description: Displays a list of the active users. See Example 6-33.
Example 6-33 user active list Command
hostname:ONS15216 EDFA2> user active list
Users
CISCO15
user active message send Command
Command: user active message send