Specifications

5-20

Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4

July 2004

Chapter 5 SNMP MIB Configuration

5.4.11 OpGroup

The cerent15216EdfaOpGroup table is used to display or set operation actions, such as saving

configuration or loading new software. The individual variables in Table 5-18 are generally used instead

of the table command. That is, when performing a cutover command, the user would use the snmp

attribute set local cerent15216EdfaOpCutover perform command.

cerent15216Edfa

LogEventSlot

Integer (-1 to 15) Read-only Index of the slot reporting the logged event. -1

implies no slot.

cerent15216Edfa

LogEventPort

Integer (0 to 15) Read-only Index of the port reporting the logged event. 0

implies no port.

cerent15216Edfa

LogEventTime

TimeStamp Read-only The value of sysUpTime when the logged event

happened.

cerent15216Edfa

LogEventDateAn

dTime

Cerent15216Edfa

DateAndTimeStr

ing

Read-only The local date and time when the logged event

happened. If the node does not support a run-time

clock the string is blank.

cerent15216Edfa

LogEventForms

DateAndTime

Cerent15216Edfa

DateAndTimeFor

msString

Read-only The local date and time when the logged event

happened. If the node does not support a run-time

clock the string is blank.

Table 5-17 cerent15216EdfaLogEventEntry Variable Descriptions (continued)

Variable Syntax

Maximum

Access Description